User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
58
2900H EN 20071108Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
Accessing the Key-operator menus
• The Key-operator mode functions (i.e. the main menu level) can be
accessed by pressing the Key-operator key on the front panel.
After pressing the Key-operator key the Main menu is displayed:
• You can scroll through the menu items by pressing the Down and Up keys
and select a menu item by pressing the Confirm key.
• At any moment, you can press the Escape key on the main menu level to
exit the Key-operator mode. If you press this key on a lower level menu you
are returned to the higher level menu. If you press this key on a data screen
after entering information, all changes on that screen are lost.
• A time-out function (default set to ten minutes) is foreseen. When this
time-out is about to expire, the following screen is displayed:
Press the Confirm key to return to the Key-operator menu. Otherwise, the Key-
operator menu will be closed.
The Drystar 5500 will sound a long beep if you press a key that is not to be used at
that moment.
7 Installation
8 Quality control