User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
65
2900H EN 20071108 Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
Viewing the sorter configuration
1 Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure, on
page 61.
2 On the Show settings menu, press the Down key three times, followed by the
Confirm key to select ‘Sorter Configuration’.
The ‘Sorter Configuration’ screen is displayed:
This screen gives an overview of:
• the installed trays and their positions (the upper tray has position one, the
lower tray position 4).
• the assignment of the installed modalities and corresponding tray(s).
3 Press the Up and Down keys to select the modality of your choice.
4 Press the Confirm key to return to the Show settings menu.
The previous screen is an example of a situation where only tray 1, 3 and 4 are
installed and the second modality is a fast modality.
1 2 3 4
1 <Modality name> 1
2 <Modality name> 3 4
3 <Modality name> 4