User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
8
2900H EN 20071108
DRYSTAR 5500/5503 REFERENCE MANUAL
ABC ordering codes
The table below lists the ordering codes for the Drystar 5500, Drystar 5503
and possible options.
Available Software versions
The table below lists the available software versions and the type of printer
they require:
Description ABC code Remark
Drystar 5500 EJ7SX
•standard two trays
• A#sharp technology is included
Drystar 5503 ESKZV
•standard three trays
• A#sharp technology is included
Mammo option for
Drystar 5500
ER3N3
• applicable for Drystar 5500
• A#sharp technology is included
Mammo option for
Drystar 5503
ER3O5
• applicable for Drystar 5503
• A#sharp technology is included
A#sharp kit for
Drystar 5500
ERA2O
applicable for Drystar 5500 with a
software version lower then 3.00
Cleaning roller tissue EQU6Y
Software
version (SW)
Printer
3.x supports Drystar 5500
4.0.x supports Drystar 5500
4.2.x supports Drystar 5500 (RoHs compliant)
5.0.x supports Drystar 5503
5.2.x supports Drystar 5503 (RoHs compliant)
6.x supports Drystar 5500 and 5503 (RoHs compliant)