User's Manual Part 2
Table Of Contents
- Table of contents
- Introducing the Drystar5300
- Basic operation (Operator mode)
- Advanced operation (Key-operator mode)
- Overview of key-operator functions
- Viewing printer information
- Accessing the Show settings menu
- Viewing general information
- Viewing input tray information
- Viewing network (DICOM) information
- Viewing general image quality information
- Viewing default densitometer information
- Viewing image quality information of a modality
- Viewing installed data-sets information
- Viewing logical printers information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Maintaining optimal image quality
- Service actions
- Quality control procedure
- Installation operations
- Controlling the Drystar5300 via a remote PC (with browser)
- System description
- Preventive maintenance
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Index
51
2920B EN 20031206
Viewing input tray information
1
Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure,
on page 49.
2 On the Show settings menu, press the Down key, followed by the Confirm key
to select ‘Input tray’.
The ‘Input tray’ screen is displayed (example):
The following information is displayed for the input tray:
• the status of the Film Identification tag (OK, disabled, overruled),
• the film data, as read by the Film Identification tag:
• film type,
• film format.
• the actual film data (as it has been modified by the key-operator):
• film type,
• film format.
• the film view (normal, back),
• the film identification data (Brand ABC, order number and pack number).
3 Press the Confirm key to return to the Show settings menu.
Status: OK
Tag info:
Film type: DT 2B
Film format: 14x17
Actual settings:
Film type: DT 2B
Film format: 14x17
Film view: normal
“Brand ABC”
“order number”
“pack number”
SH