User's Manual Part 2
Table Of Contents
- Table of contents
- Introducing the Drystar5300
- Basic operation (Operator mode)
- Advanced operation (Key-operator mode)
- Overview of key-operator functions
- Viewing printer information
- Accessing the Show settings menu
- Viewing general information
- Viewing input tray information
- Viewing network (DICOM) information
- Viewing general image quality information
- Viewing default densitometer information
- Viewing image quality information of a modality
- Viewing installed data-sets information
- Viewing logical printers information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Maintaining optimal image quality
- Service actions
- Quality control procedure
- Installation operations
- Controlling the Drystar5300 via a remote PC (with browser)
- System description
- Preventive maintenance
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Index
97
2920B EN 20031206
Restoring the configuration settings
When necessary, you can restore the configuration settings of the printer. The
following functions are available for restoring a backup copy of the
configuration files:
• ‘Restoring printer settings from an external CF-card’ (page 98)
• ‘Restoring the previous configuration from the internal CF-card’ (page 100)
From the external CF-card, you have the choice between restoring the
complete configuration or only the network settings (e.g. for mobile
installations).
Accessing the restore configuration menu
1
Press the Key-operator key to enter the key-operator mode.
2 On the key-operator main menu, press the Down key four times, followed by
the Confirm key to select ‘Restore configuration’.
Before you start a restore operation, you have the opportunity to save the current
configuration. Therefore, the ‘Update backup on CF-card’ screen is displayed:
If you want to backup the current configuration on an external CF-card, press the
Confirm key (YES). The printer will perform the ‘Save configuration procedure’ (see
page 95).
If you do not want to save the current configuration, press the Escape key (NO).
3 The ‘Restore from CF-card’ screen is displayed:
4 Press the Escape key to return to the key-operator main menu.
5 Press the Escape key to quit the key-operator mode.
Update backup on
CF-card
YES (v) NO (x)
RC
Restore from
CF-card
1External
2 Internal
RC