User's Manual Part 2
Table Of Contents
- Table of contents
- Introducing the Drystar5300
- Basic operation (Operator mode)
- Advanced operation (Key-operator mode)
- Overview of key-operator functions
- Viewing printer information
- Accessing the Show settings menu
- Viewing general information
- Viewing input tray information
- Viewing network (DICOM) information
- Viewing general image quality information
- Viewing default densitometer information
- Viewing image quality information of a modality
- Viewing installed data-sets information
- Viewing logical printers information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Maintaining optimal image quality
- Service actions
- Quality control procedure
- Installation operations
- Controlling the Drystar5300 via a remote PC (with browser)
- System description
- Preventive maintenance
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Index
98
2920B EN 20031206
Restoring printer settings from an external CF-card
1
Perform steps 1 to 3 of the ‘Accessing the restore configuration menu’
procedure on page 97 to select the ‘Restore from CF-card’ screen.
2 Press the Confirm key to select ‘External’.
The ‘Restore configuration’ screen is displayed:
• If you want to restore only the network parameters (e.g. for mobile installations),
press the Down key, followed by the Confirm key to select ‘Network only’.
• If you want to restore the complete configuration, press the Confirm key to select
‘General’.
In both cases, the printer will ask you to insert a CF-card:
3 Insert a CF-card.
" Refer to ‘Inserting a CF-card’ on page 21.
In case a wrong CF-card has been inserted, the following message is displayed:
4 If there are multiple save set files present on the CF-card, a list is shown.
The ‘Select dataset’ screen is displayed:
Restore
configuration
1 General
2 Network only
RC
RC
Restore
Configuration
Please insert card
Restore
from CF-card
Wrong card inserted
RC
RC
Select dataset
Dataset xyz v1.00
Dataset abc v1.00
Dataset def v1.00
etc...