User Manual
Table Of Contents
- Table of contents
- Introducing the Drystar5300
- Basic operation (operator mode)
- Advanced operation (key-operator mode)
- Equipment information sheet
- Quality Control Charts
16
2921B EN 20031206
Operating modes
The Drystar 5300 can be operated in four modes: Operator mode, Key-
operator mode, Service mode and Administrator mode.
Operator mode
The Operator mode groups all basic functions that are intended for
radiographers without special technical skills:
• Producing diagnostic usable hardcopies,
• Loading consumables,
• Ensuring normal operation of the printer.
All functions of the Operator mode are described in both User and Reference
manuals. Refer to Chapter 2, ‘Basic operation (operator mode)’.
Key-operator mode
The Key-operator mode groups advanced functions that are intended for
technically skilled operators such as X-ray operators, network managers and
service and hospital technicians.
The Key-operator mode can be accessed via the Key-operator key on the
keypad and is menu-driven. The Key-operator functions are described in the
Reference manual only. Refer to Chapter 3, ‘Advanced operation (key-
operator mode)’.
Service mode
The Service mode functions are reserved for trained Service personnel. The
Service mode is password protected and is only accessible by browser via a
remote PC.
Administrator mode
The Administrator mode functions are reserved for the System Administrator.
The Administrator mode is password protected and is only accessible by
browser via a remote PC.