User's Manual Part 2

59
2831A EN 20041201 Advanced operation (key-operator mode)
DRYSTAR 5302 USER MANUAL
Preventive maintenance schedule
The Drystar 5302 is designed for trouble-free service. Maintenance and
cleaning involve only some minor user tasks. Refer to the following pages for
the appropriate cleaning procedure.
Safety guidelines
• Do not lubricate the printer.
• Do not attempt to disassemble the printer.
• Do not touch the resistor line of the print head.
• Always switch off the Drystar 5302 and disconnect the power cord from
the outlet before carrying out any maintenance work inside the printer.
Interval What to do? Page
Ad hoc ‘Cleaning the exterior’ 60
When image quality tends to
degrade. An appropriate warning
message is displayed.
‘Cleaning the print head’ 61
To prevent damage to the printer while performing maintenance, observe
the following safety precautions:
Film jam removal or cleaning the printer head can be done without switching the
power off. Nevertheless, care should be taken and the ‘Safety precautions’ on page 9
should be respected.