User Manual Part 1

32
2852 A EN 20070205
DRYSTAR AXYS
Procedure:
1 Switch off the Drystar AXYS (refer to “Switching off the Drystar AXYS” on
page 63).
2 Disconnect the cables.
3 Move the Drystar AXYS to its destination (with 2, preferably 3 persons!).
4 Reconnect the cables.
5 Switch Drystar AXYS on (refer to “Switching on the Drystar AXYS” on page 48).
Changing the film format of the trays
The key-operator can adjust the film size setting of both input trays (8x10” up to
14x17” film sizes).
Before a different film format can be loaded, the film format settings of the tray
has to be changed. After this modification, the ‘film format’ parameter is auto-
matically read from the Film Identification tag when the new film pack is
loaded.
Note: Never load another film format when the input tray is not empty.
Intermediate changing of film formats increases the risk for dust, which
can damage the thermal print head (TPH).
Note: The system performs an automatic calibration when the film format
has been changed.