User Manual Part 1

33
2852 A EN 20070205
DRYSTAR AXYS
Proceed as follows to perform the mechanical modification:
1 Make sure that the printer is in ‘Ready’ mode.
2 Open the input tray you want to adapt and remove eventually loaded films.
3 Locate the correct tab position for the desired film format.
Note: Note that there is a screw to secure the position of the 10” and 14”
width format tabs. The format tabs positioned in the depth are not
provided with a screw.
8"
11"
12"
14"
17"
10"
14"
10” and 14” width
tab