User Manual Part 2

2852 A EN 20070205

DRYSTAR AXYS

Performing quality control (QC) tests

for general radiography applications

(DT 2 B and DT 2 C)

The following procedures must be performed daily, weekly or annually as indi-

cated.

The reason for performing quality control tests is to determine if any significant

image quality variation or deterioration has occurred which may require correc-

tive action. Comparing the results of the tests with the reference values previ-

ously established does this.

This procedure allows the operator to take the necessary preventive actions

before any image quality loss can take place.