Operation Manual

Installing the Battery in the Remote Control
Remove the battery cover on the rear of the remot control and insert the battery.Make suree
the polarities (+ and -) are aligned correctly.
Note !
Normally the batteries can last for around one year,if remote control does not work,please
replace the batteries.
If the player is not used for a long time,take out the batteries to prevent leakage and possible
damage to the remote control.
Do not mix new and old batteries.Nerer mix different types of batteries.
How to use the remote control
Point the remote control to the remote sensor on the player front panel. Its working limits
is within an angle of 3 0 and a distance of 2m. When using the remote control,no obstacle
is to be set between the remote control and remote sensor.
How to u e the Remote Controls
Basic Operation
Getting Started
Assemble the Photo Frame bracket on the back to prop the up, insertplayer adapter
DC plug into the first, then plug adapter into a standard outlet.unit
,
..
Once you have photos on the memory card or USB device insert the card or USB device into
the proper slot
Do not force the card into the slot
,
:
Switch the Power switch on the rear panel of the player to be ON the screen will display
as below
8
7
And then the player will start photo slideshow .
Note:!
.
,.
The player will select one memory card to play at a time even though more
might be installed If you insert a memory card and USB device at the same
time the player will play the file on the memory card firstly
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. .