Operation Manual

6 AgfaPhoto Digital Photo Frame AF 5086MS · AF 5105MS · AF 5135MS
EN
3 Initial Operation
Packing Contents
1 Photo Frame
1 Digital photo frame with bracket
2 Interchangeable F rames
2 Interchangeable frames
3 A Remote Control (with battery)
3 A remote control (with battery)
4 Power supply
4 Power supply
5 USB Cable
5 USB cable
User Guide (not dep icted)
User Guide (not depicted)
Verpackungsinhalt AF 5135
Packing Contents
Mount the Bracket
Mount the Bracket
Assemble the Photo Frame bracket on the back to prop the
player up.
Ständer anbringen
Connecting the Mains Cable
Mains Voltage at Setup Location
1 Insert the mains cable into the connection located on
the rear side of the device. Connect the mains cable to
the electrical socket. Do not switch on the device!
Connecting to a PC
Using the USB cable, you can connect your photo frame
to a computer to transfer files between the internal memo-
ry and computer.
1 Switch the device off using the on/off switch on the
rear.
2 With the photo frame turned off, connect the small end
of the cable to the frame and the large end to your com-
puter.
3 Switch the device on using the on/off switch on the
rear. Allow the computer a few moments to recognize
the new hardware. Compatible photo, music and video
files can be copied using Explorer onto the internal
memory
If one of the parts is missing or damaged, please con-
tact your retailer or our customer service.
MENU
ESC
DD/MM/ YY
Check whether the mains voltage of your device (in-
dicated on the type label) matches the mains voltage
available at the setup location.
If you connected the photo frame to a computer, the
inserted memory card can not be recognized.
af-5086_5105_5135ms_manual_en_253145915-a.book Seite 6 Montag, 15. September 2008 9:47 09