User's Manual

Page 1 of 2 15/07/2019

Manual RFID readerRegulatoryIntegrationInstructions.doc

Medical Imaging

From: Jan Vercammen (6233) – R&D Mortsel Electronics

Date: July 6, 2019

Concerning: Regulatory and hardware instructions for integration of RFID

reader into host applications (concerns FCC ID: HPL-DR100SRFID)

This document describes the integration of a modular short-range RFID reader

into host applications. The company internal reference of the RFID reader (or

reader for short) is A813168.

The RFID reader will never be sold to external parties. As the RFID reader is for internal

(company) use only there is no user manual. The radio regulations are covered by radio type

testing on the RFID reader. The host application with assembled RFID reader is tested for

digital device (unintentional emission) regulations.

Note that the reader as standalone unit cannot function (per definition).

FCC Regulatory requirement.

When integrating the reader into Agfa host applications the integrators should respect the

following regulatory requirement:

The RFID reader has a permanent affixed label (with the text “FCC ID: HPL-DR100SRFID”)

and, because the module is not visible from the outside, an external label is required that has

the text “Contains Transmitter Module FCC ID: HPL-DR100SRFID” or “Contains FCC ID: HPL-

DR100SRFID”.

This text must be integrated into the identification plate of the host application or on a separate

label in an accessible position.

The host application requires the following label:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

PAGE 1
ab Medical Imaging From: Jan Vercammen (6233) – R&D Mortsel Electronics Date: July 6, 2019 Concerning: Regulatory and hardware instructions for integration of RFID reader into host applications (concerns FCC ID: HPL-DR100SRFID) This document describes the integration of a modular short-range RFID reader into host applications. The company internal reference of the RFID reader (or reader for short) is A813168. The RFID reader will never be sold to external parties.
PAGE 2
ab Medical Imaging Additional regulatory information (for the host application device manual): For all Class B Digital Devices, the following statement must be included in the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.