User's Manual

AgfaPhoto OPTIMA 103
34
Setting the Drive Mode
Your camera features a Self-timer and Burst which can be
set in the Drive mode function in the Record Menu. The
Self-timer allows you to take images after a pre-defined
delay. While burst lets you take consecutive shots. This
function is only available in recording still images. The
Drive mode setting is automatically set to off when you
turn off the camera.
To set the Drive Mode
1. From the Record menu, select Drive Mode.
2. Use the or keys to go through the selection.
3. Press the SET button to save and apply changes.
The table below shows the available Drive mode settings.
Icon Item Description
10 Sec
Sets a 10-second delay to capture image after pressing the Shutter
button.
2 Sec
Sets a 2-second delay to capture image after pressing the Shutter
button.
Double
Performs delay and capture twice:
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay then captures the image again.
Burst
Performs continuous shooting when the Shutter button is pressed.
Stops shooting when the Shutter button is released.
Speedy Burst
Captures 30 images in a shot when the Shutter button is pressed.
Auto set Image size to VGA only.
Off
Captures an image without time delay.