Service manual

Avantra 36/44 Service Manual

3-38 Diagnostics

Firmware Revisions

Selecting Firmware Revs displays a dialog box that lists the ﬁrmware revision levels

installed in the imagesetter currently connected.

Avantra Firmware Revisions

DEC Firmware (K4/K1 FlashROM : *

DSP Firmware (DEC FlashROM) : *

OCP Firmware (OCP FlashROM : *

OCP Download (OCP EEPROM) : *

Diagnostic Firmware (C9) : *

Correction Table Version-Type : *

Bridge/OLP (OLP FlashROM) : *

* The revision levels change from release to release.

Display Error Log

Selecting Error Log displays a dialog box that shows a scrolling list of errors logged

in the imagesetter. The error log contains the last 64 errors (both boot and applica-

tion) encountered by the system. If the system supports real-time clock then only

the last 30 errors will be displayed. The error codes are in DEC EEPROM. The soft-

ware retrieves the error log from EEPROM upon entering this menu selection. Clear

the error log by pressing ALT C. A typical error log is shown below.

AVANTRA ERROR LOG

Index Error Date* Time* Description

====================================================================

000 037 11-21-96 10:16 Output Cassette Jam/Blocked Sensor

001 01 11-07-96 15:50 Carriage Jam

* If the system does not support real-time clock then the Error Log will display “Media” instead of date

and time.