Service manual

Avantra 36/44 Service Manual

1-18 Installation

Figure 1-14 Preparing the media transport retainer bracket.

➀–Media transport retainer bracket (one of two).

➁–Shipping screw (one of two),between two lockdown screws.

9. Locate the take-up light shield in the center of the unit. Refer to Figure 1-15.

Remove the shield by unscrewing the three (3) locking knobs and pulling the

shield straight out.

Figure 1-15 Removing the take-up light shield.

➀–Take-up light shield. ➁–Three shield locking knobs.