Service manual

Section IV: On-line Processor

Maintenance 4-17

4.5.1 How to Use the Repair Method Tables

The three tables on the following pages help locate and ﬁx problems that may

occur. The following procedure explains how to use these tables:

1. Look for the problem in Table 4-2 below and note the code number.

2. Find the same problem code number in Table 4-3 below and make a note

of the numbers listed to the right. These refer to the repair steps in Table 4-

4 below.

3. Follow the repair steps in Table 4-4 in the sequence indicated, until the

problem is ﬁxed.

WARNING: When the ON/OFF switch on the Rapiline OLP is off, the

display is switched off, but there is still voltage in the system. Turn

off the main power before opening the electronics box!