DC-2030m User manual
AgfaPhoto DC-2030m Thank you for purchasing this AgfaPhoto digital camera. Please read these operating instructions carefully in order to use the digital camera correctly. Keep the instructions in a safe place after reading so that you can refer to them later. Precautions • Do not aim the camera directly into the sun or other intense light sources which could damage your eyesight. • Do not try to open the case of the camera or attempt to modify this camera in any way.
AgfaPhoto DC-2030m Contents GETTING STARTED TO ACTIVATE SMILE CAPTURE 22 USING INTELLIGENT SCENE MODE 23 TO ACTIVATE INTELLIGENT SCENE 1 USING BLINK DETECTION MODE USING THIS MENU 1 CONTENTS 2 PARTS OF THE CAMERA 3 INSERTING THE BATTERIES 5 LOW BATTERY INDICATOR 5 ABOUT BATTERY TYPE 5 INSERTING THE MEMORY CARD 6 ABOUT CAMERA MEMORY 7 DCF PROTOCOL 7 SETTING THE DISPLAY LANGUAGE / DATE & TIME 7 SETTING THE DISPLAY LANGUAGE 7 SETTING THE DATE & TIME 8 USING THE LCD MONITOR 9 R
AgfaPhoto DC-2030m PLAYBACK PLAYING BACK IMAGES PLAYING BACK MOVIE CLIPS 43 TROUBLESHOOTING 60 SPECIFICATIONS 61 43 CUSTOMER CARE 63 43 COPYRIGHT 64 TRADEMARK RECOGNITION 64 MAGNIFYING & TRIMMING STILL IMAGES 44 DISPOSAL OF WASTE EQUIPMENT BY VIEWING IN THUMBNAIL 45 USERS IN PRIVATE HOUSEHOLDS IN THE PLAYING A SLIDE SHOW 45 EUROPEAN UNION 64 46 FCC COMPLIANCE AND ADVISORY 64 DELETING A SINGLE FILE 46 DECLARATION OF CONFORMITY 65 DELETING MULTIPLE FILES 47 DELETING ALL FILES
AgfaPhoto DC-2030m Getting Started Using This Menu Getting Started This section contains information you should know before using this camera. Basic Operation This section explains all recording features of this camera. Basic Recording This section explains how to record still images, movies, and audio files. Other Recording Functions This section explains common operations about recording images. Playback This section explains playback, delete, and edit functions of still images, movies and audio files.
AgfaPhoto DC-2030m Contents AgfaPhoto DC-2030m USB Cable Soft Case Strap Software Installation Quick Guide AV Cable 2 x AA Batteries CD-ROM Caution y Actual accessories may be different. y Note that the shape of the charger plug depends on the area where you purchased the camera. y Do not swing the camera around by the strap.
AgfaPhoto DC-2030m Parts of the Camera 1. Flash ( page 29) 2. Microphone 3. Lens 4. AF Lamp / Self-timer Lamp 5. Zoom Button ( y Thumbnail ( y Playback Zoom ( page 28) page 45) page 44) 6. Playback Button ( page 13) 7. Operation Lamp 8. Mode Button ( y page 13) Delete Button ( page 46) 9. Menu Button ( page 16) 10. LCD Monitor ( page 9) 11. Flash Button ( page 29) 12. SET/DISP Button ( page 11) 13.
AgfaPhoto DC-2030m 14. Speaker 15. Power Button ( page 12) 16. Stabilizer 17. Shutter Button page 21, 34) ( 18. USB/AV Terminal ( page 20, 57) 19. Strap Ring 20. Memory Card Slot Cover ( page 6) 21. Tripod Socket 22.
AgfaPhoto DC-2030m Inserting the Batteries 1 Open the battery cover. y Slide the battery cover in the direction indicated by the arrow. 2 Insert the batteries. y Insert two AA-size batteries with the positive (+) and negative (-) poles matching the directions indicated inside the battery room. 3 Close the battery cover. Low Battery Indicator A low battery indicator appears on the LCD screen when the batteries are nearly exhausted.
AgfaPhoto DC-2030m Inserting the Memory Card Expand your camera’s storage by using SD or SDHC memory cards. 1 Open the SD Card cover. y Slide the battery cover in the direction indicated by the arrow. 2 Insert the card. y Insert the card with the label facing up and the arrow pointing in. Tips y To remove the card, gently press on the edge of the card and release it. Pull the card out and close the SD Card cover. 3 Close the SD Card cover.
AgfaPhoto DC-2030m About Camera Memory This camera is equipped with internal memory. If the memory card is not inserted in the camera, all images and movie clips recorded by the camera will be stored in the internal memory. If the memory card is inserted, images and movie clips are stored on the memory card. DCF Protocol The DCF protocol defines the format for image file data as well as the directory structure for the memory card.
AgfaPhoto DC-2030m Setting the Date & Time 1 Turn the power on, and set the camera to the Setup Menu ( 2 page 17). Select [ y Press Date & Time]. or to select [Date & Time] then press or the SET button to launch the submenu. 3 Set date and time. y Press or to change the value of the cursor located. Press or to move the cursor between settings. Tips y Holding down y For date stamp setting ( 4 or changes the values continuously. page 41). Apply the setting.
AgfaPhoto DC-2030m Using the LCD Monitor The LCD monitor is used to compose images while recording, adjust settings and replay images. The following indicators may appear on the LCD monitor while recording or playing back images.
AgfaPhoto DC-2030m PLAYBACK mode 1 Playback mode ( 2 Protect ( 3 Voice memo ( 4 File number / Total 5 Battery ( 6 Storage media page 13) page 48) page 37) page 5) 7 Recording info ( 8 Histogram 9 Captured date & time 10 Voice memo control ( 11 DPOF ( 12 Resolution ( page 11) page 37) page 54) page 27) Caution y Some information may not display correctly if you display images captured by other camera model.
AgfaPhoto DC-2030m Changing the LCD Status Press the SET/DISP button changes the LCD status as shown below: REC mode (A) OSD on (B) Full OSD (C) Guide line (D) OSD off Tips y Use the “Guide line” to compose images easily before shooting images.
AgfaPhoto DC-2030m Basic Operation Turning the Power On and Off 1 Press the POWER button (n) to turn on the camera in the REC mode. y The power turns on, the lens extends and the LED lights in green. Press the PLAYBACK button (o) to turn on the camera in the PLAYBACK mode. y The power turns on, and an image displays on the LCD monitor (p). 2 Press the POWER button (n) again to turn the power off. y The power turns off, the lens retracts and the LED turns off.
AgfaPhoto DC-2030m Power Saving Function For saving the battery power, the LCD monitor automatically turns off 1 minute after the last control accessed (factory-preset setting). Press any button other than the power button to turn on the LCD monitor. You can change the power save setting in Setup menu ( page 19). After the power saving function has been active for 1 minute, the power will turn off completely. Press the POWER (n) or the PLAYBACK (o) button to restore the power.
AgfaPhoto DC-2030m Selecting the REC mode 1 Set the camera to the REC mode ( 2 page 13). Launch the mode palette. y Press the MODE button (o) to show the scene mode palette. 3 Select a mode. y Use the four-way control to select a desired mode and press the SET button to confirm the setting. Display Title Description Program The camera makes settings suitable for the shooting conditions. Movie Voice REC For recording movie clips. For recording audio.
AgfaPhoto DC-2030m Display Title Description Snow Used for the beach or snow scenes. Sports Used to take still pictures in high speed motions. Party Used for the wedding or indoor parties. Candlelight Night Portrait Soft Skin Soft Flowing Water Food Building Text Auction To capture the warmth effects of candle light. Use to take portrait pictures when the background is darker. Enhance the tone of skin so that the facial skin appears smooth. Can take pictures with effects as smooth as silk.
AgfaPhoto DC-2030m Using the Menus When a menu is displayed, the four-way control and the SET button are used to make the desired settings. REC menu 1 Turn the power on, and set the camera to the REC mode ( page 13). 2 Open the REC menu. y Press the MENU button (n) to display the menu. 3 Select an item. y Press or (o) to select a menu item. 4 Change the setting. y 5 Press or (o) to change the setting. Press the MENU (n) or the SET (o) button to save the settings and close the menu.
AgfaPhoto DC-2030m AEB Off / Highlight Off / Sharpness 40 / / 40 / 41 / Effect Off / B&W / Sepia / Red / Green / Blue 41 Date Stamp Off / Date / Date & Time 41 Digital Zoom Off / On 28 Face Tracking Off / On 42 Photo Frame Off / Frame 1 ~ 10 42 AF Lamp Auto / Off 42 REC menu list (Movie) Menu Item Available Setting Movie Size Metering White Balance / Page 35 / / / Auto / / 38 / / / / 38 Setup menu 1 Turn the power on, and set the camera to the REC or PLAYBACK m
AgfaPhoto DC-2030m 4 Select an item. y Press or (o) to select a menu item and then press or the SET (o) button to launch the submenu. 5 Change the setting. y Press or (o) to select an option and press button to apply the setting. 6 Press the MENU (n) button to close the menu.
AgfaPhoto DC-2030m Setup menu list Menu Item Functions [Shutter]: Sets the shutter sound on and off. [Start-up]: Sets a type of the start-up sound. Sounds [Beep]: Sets the operation sound on and off. [Volume]: Adjusts the volume of the shutter sound, start-up sound, beep and playback sound. [Off]: The captured image will not automatically display after shooing. [1 sec.]: The captured image will display for 1 second after Auto Review shooting. [3 sec.
AgfaPhoto DC-2030m Menu Item Functions depending on your region. [NTSC]: America, Japan and others [PAL]: Europe, Oceania and others [Computer] / [Printer]: USB Sets the USB mode to connect the camera with a printer or computer ( S.Image page 57). Sets a recorded image as the start-up image ( page 55). To erase all data stored in the memory card if you are using a card, or all data stored in the internal memory if there is no card inserted. Format y A “BUSY...
AgfaPhoto DC-2030m Basic Recording Recording Still Images 1 Turn the power on, and set the camera to the REC mode page 13). ( 2 Compose the subject on the monitor. y Aim the focus area (n) to the subject that you want to take. 3 Half press the shutter button to focus the image. y The focus area (n) becomes green while in focus, then shutter speed (o), aperture value (p) and ISO value (q) are displayed.
AgfaPhoto DC-2030m Using smile capture Mode The smile capture model uses smile tracking to automatically capture images. Pressing the shutter button will enable the camera to take 6 continuous shots whenever a smile is detected. This feature is most useful in capturing different angles and smiles of moving people. When capturing an image with more than one person, the camera detects the smile of the closest person on the center of the screen To activate smile capture 1 Select submenu.
AgfaPhoto DC-2030m Using Intelligent Scene Mode With the Intelligent Scene Mode, the camera automatically detects the shooting conditions and switches to the appropriate scene and settings when aiming on a subject. This feature is most useful for novice users to capture great images even without basic knowledge of photography To activate Intelligent Scene 1 from Scene Mode Select submenu. ( 2 page 13). Focus the camera on the subject to capture.
AgfaPhoto DC-2030m Icon Intelligent Scene Modes Description y There is no face detected y The focus distance is within the macro range. This mode can only be detected when you half press the shutter button. This mode is set when: y There is no face detected y The focus distance is more than 1.5 meters. y The EV setting is lower than 5 or 4.5. Night Scene Tips y After the camera detects the shooting conditions, this icon changes to show the detected scene mode.
AgfaPhoto DC-2030m To activate Blink Detection 1 Select from Scene Mode submenu. ( 2 page 13). Half press the shutter button to focus the subject. The frame turns green to indicate focus is set. 3 Press the shutter button to capture the image. The image is automatically saved unless the camera detects that the subject blinked an eye. 4 Select Save Image to save or Cancel to disregard.
AgfaPhoto DC-2030m Using the Q mode The Q mode provides a simplified camera interface. Larger icons and fewer controls make it easier to take pictures anytime, especially for the beginners and elder users. You can use only the basic settings in the Q mode: Flash: Auto / Red eye / Force on / Slow sync / Force off Button Macro: Off / On SET/DISP: OSD on / Guide line / OSD off Stabilizer: Off / On Resolution: 12M / 3:2 / 16:9 / 8M / 4M / 2M / VGA Drive Mode: Off / 2 sec. / 10 sec.
AgfaPhoto DC-2030m Setting Image Size and Quality You can select lower image resolution and quality to decrease the image size to capture more images. Choose a suitable setting according to the desired image quality and purpose. For details, see page 16. Resolution Values Image Size 4000 x 3000 Print Size Larger Printing larger than A4-size. 4000 x 2664 4000 x 2248 3264 x 2448 Smaller 2272x 1704 1600 x 1200 640 x 480 Printing to postcards or attaching to e-mail.
AgfaPhoto DC-2030m Using the Zoom Function Your camera has a combination of optical and digital zoom functions that allows you to zoom in on far away subjects or zoom out for a wide angle shot. The optical zoom is achieved by mechanically adjusting the lens of the camera. The digital zoom enlarges or shrinks the image using a software process. 1 Select the zoom setting, and point the camera at the subject. 2 Press the zoom button (n) to compose the image. [W]: zoom out for a wide-angle shot.
AgfaPhoto DC-2030m Using the Flash The flash is not only for taking pictures when there is insufficient light, but also when the subject is in shade or in backlight conditions. Press the flash button to cycle your camera through the various flash modes. The flash will not activate when continuous shooting or movie recording. 1 Turn the power on, and set the camera to the REC mode ( 2 page 13). Press the flash button (n) to change the flash mode.
AgfaPhoto DC-2030m Caution y The flash charging time may increase when the battery is low. y The available flash settings are limited depending on the REC mode you selected Using the Macro Your camera is equipped with a macro function that allows you to focus on very close subjects. In macro mode you can focus on subjects 10 cm from the lens when in the maximum wide angle setting and 40 cm in the maximum telephoto setting. 1 Turn the power on, and set the camera to the REC mode page 13).
AgfaPhoto DC-2030m Tips y Distances referred to measure the distance between the camera lens surface and the subject. y The available macro settings are limited depending on the REC mode you selected. Using the Self-timer & Burst Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is shot. Use the burst to record continuous still images shooting. 1 Turn the power on, and set the camera to the REC mode page 13).
AgfaPhoto DC-2030m Keep pressing the shutter button fully to take continuous shooting. Release the shutter button to stop shooting. 4 Press shutter button to take a picture. Tips y When using the self-timer function, be sure to use a tripod or place the digital camera on a level, stable surface. Using the Aperture Priority In this mode, you can set an aperture value to match the brightness. A higher aperture value brings the background out of focus.
AgfaPhoto DC-2030m Using the Shutter Priority In this mode, you can set a shutter speed to match the brightness. Faster shutter speeds allow you to take a sharp picture of a moving subject while slower speeds create a trail effect and allow you to shoot without a flash in dark areas. 1 Turn the power on, and set the camera to the Shutter Priority ( 2 page 13). Adjust the shutter speed by pressing 3 or button. Press shutter button to take a picture.
AgfaPhoto DC-2030m Using the Stabilizer With more sensibility and faster shutter speed to bright up the pictures, effectively prevent blur image caused by hand shack or target movement. Recording Movie Clips 1 Turn the power on, and set the camera to the Movie mode page 13). ( 2 Compose the subject on the monitor. y Aim the focus area (q) to the subject that you want to take. y The LCD monitor displays the available recording time (p). 3 Start recording.
AgfaPhoto DC-2030m 4 Finish recording. y Press the shutter again to end recording. y The camera will stop recording automatically when the memory capacity has been reached. Caution y Sound cannot be recorded while pressing the zoom button.. y The digital zoom cannot be used in Movie mode. y When the maximum capacity for a single video has been reached, simple press the shutter button again to continue recording. The camera will automatically stop recording when the memory capacity is full.
AgfaPhoto DC-2030m y Recorded movies are set to YouTube® standard resolution of 640 X 480. y Recording automatically stops when the file reaches 100 MB. Tips y Using VLC software to play videos of the MAC may lead to display issues. We recommend using the QT player for video playback. y To record a YouTube® movie, select from the Movie Size function. Recording Audio Clips 1 Turn the power on, and set the camera to the Voice REC mode page 13). ( 2 Press the shutter button to start recording.
AgfaPhoto DC-2030m y Press to start playing the audio clip. y Press to stop the audio clip, or press paused, press to pause it. When audio clip again to resume. Recording a Voice Memo You can add a voice memo to the still images after you record it. 1 Turn the power on, and set the camera to the PLAYBACK mode page 13). ( 2 Press or to select a still image that you want to add a voice memo to. y If the image already has the voice memo recorded, the appears on the LCD monitor.
AgfaPhoto DC-2030m Playing Back a Voice Memo 1 Turn the power on, and set the camera to the PLAY mode ( 2 Press 3 Start playing back. or page 13). to select the image that has the voice memo recorded. y Press to start playing the voice memo. y Press to stop the voice memo, or press memo paused, press to pause it. When voice again to resume. Other Recording Functions Setting the Metering There are 3 different light metering options available on your camera.
AgfaPhoto DC-2030m Adjusts for normal indoor lighting conditions. Corrects the orange hue of household light bulbs. Ideal for indoor photos under tungsten or halogen lighting without a flash. Adjusts for fluorescent lighting. Corrects the green hue of fluorescent lighting. Ideal for indoor photos under fluorescent lighting without a flash. For more accurate adjustment or when the light source cannot be specified.
AgfaPhoto DC-2030m Setting the ISO With the initial settings, the ISO sensitivity is automatically set according to the brightness of the subject. Option Auto Description Sets the ISO sensitivity automatically. ISO 125 Sets the sensitivity to ISO 125 equivalent. ISO 200 Sets the sensitivity to ISO 200 equivalent. ISO 400 Sets the sensitivity to ISO 400 equivalent. ISO 800 Sets the sensitivity to ISO 800 equivalent. ISO 1600 Sets the sensitivity to ISO 1600 equivalent.
AgfaPhoto DC-2030m Setting the Sharpness You can select whether you want the image to have sharp or soft outlines. Option Description The edges of the image are emphasized. The edges will become sharp, but noise may occur in the recording image. The edges of the image are sharp. This is suitable for printing. The edges of the image are softened. This is suitable for editing images on PC. Setting the Photo Effect You can add special effects to your images in Record mode or in Playback mode.
AgfaPhoto DC-2030m Setting Face tracking After initializing the face tracking function, the lens will lock the main character in the picture and follow their movements. Also, the use of auto digital zoom technology allows the lens to extend and retract. Tips y Pressing the shutter halfway showing green AF area means focus is complete. y Face tracking is powered by Arcsoft. y Under some environmental influences, face tracking function may be limited.
AgfaPhoto DC-2030m Playback Playing Back Images 1 Turn the power on, and set the camera to the PLAYBACK page 13). mode ( y The latest recorded image appears on the LCD monitor. y If there are no images stored, a message [No image] appears. 2 or Press the four-way control y : displays the previous image. y : displays the next image. (n). Tips y Holding down or scrolls images in a high speed. Playing Back Movie Clips 1 Turn the power on, and set the camera to the PLAYBACK mode page 13).
AgfaPhoto DC-2030m Tips y During movie playing back, press y Press the shutter to capture the still image from the movie clip while it had paused. to fast forward or press to rewind it. Magnifying & Trimming Still Images 1 Turn the power on, and set the camera to the PLAYBACK mode ( 2 page 13). Select an image. y Press or (p) to select the image that you want to magnify or trimming. y Only still images can be magnified and trimmed. y 3 Magnify the image.
AgfaPhoto DC-2030m Viewing in Thumbnail 1 Turn the power on, and set the camera to the PLAYBACK mode ( 2 page 13). Press the zoom button [W], a thumbnail screen is displayed. 3 Use the four-way control to select the desired image, and press [T] or the SET button to show the selected image in full screen. Tips y You can protect or delete multiple images in thumbnail, see page 47, 49. Playing a Slide Show 1 Turn the power on, and set the camera to the PLAYBACK mode ( 2 page 13).
AgfaPhoto DC-2030m 4 Playing the slide show. y Press the SET button (o) to start the slideshow. y During the slideshow, press the SET button (o) to pause the slideshow and press the SET button again to resume. Deleting Files Deleting a Single File 1 Turn the power on, and set the camera to the PLAYBACK mode ( 2 page 13). Open the menu. y Press the MENU button (n), then use the four-way control (o) to select Delete ( ) and press the SET button (o).
AgfaPhoto DC-2030m Deleting Multiple Files 1 Turn the power on, and set the camera to the thumbnail screen ( 2 page 45). Open the menu. y Press the MENU button, then or Press to select to select Delete ( ) and press the SET button. 3 Press y 4 or to select [Select], and then press the SET button. The frame of the selected image turns green. Select multiple images. y Use the four-way control to select the image. y Press the SET button toggles the on and off.
AgfaPhoto DC-2030m Deleting All Files 1 Turn the power on, and set the camera to the PLAYBACK mode ( 2 page 13). Open the menu. y Press the MENU button, then use the four-way control to select Delete ( ) and press the SET button. y You can open the menu in full screen or in thumbnail. 3 Press 4 Press the SET button to delete all unprotected images. or to select [ALL], and then press the SET button.
AgfaPhoto DC-2030m Protecting All Files 1 Turn the power on, and set the camera to the PLAYBACK mode ( 2 page 13). Open the menu. y Press the MENU button, then use the four-way control to select Protect ( ) and press the SET button. y You can open the menu in full screen or in thumbnail. 3 Press y or to select [Lock all], and then press the SET button. To unlock all files, select [Unlock all] in this step, then press the SET button. 4 Press the SET button to protect all images.
AgfaPhoto DC-2030m 4 Select multiple images. y Use the four-way control to select the image. y Press the SET button toggles the on and off. Repeat this step until all images that you want to protect are displayed with an icon 5 . Protect images. y Press the MENU button, then select [Yes] and press the SET button. All selected images will be protected. y To cancel protect, press the MENU button in this step.
AgfaPhoto DC-2030m Changing the Image Size 1 Turn the power on, and set the camera to the PLAYBACK mode ( page 13). 2 Press 3 Open the menu. y Press y to select the image you want to resize. Press the MENU button, then use the four-way control to select Resize ( 4 or ) and press the SET button. or to select an option, and then press the SET button. The resized image will be saved as a new file. Caution y Only a large size image can be resize to a smaller one.
AgfaPhoto DC-2030m Choosing the Image with Photo Frame 1 Turn the power on, and set the camera to the PLAYBACK mode ( page 13). 2 Press 3 Open the menu. y or Press the MENU button, then use the four-way control to select Photo Fames ( 4 to select the image you want to add the photo frame. Press or ) and press the SET button. to select the image you want, then press the SET button to apply the choice. y The edited image will be saved as a new file.
AgfaPhoto DC-2030m Copying the Files You may copy the data from the camera’s internal memory to the memory card for convenience. 1 Be sure you have inserted a memory card into your digital camera. Set the camera to the PLAYBACK mode. page 13). ( 2 Open the menu. y Press the MENU button, then use the four-way control to select Copy to card ( ) and press the SET button. 3 Press y or to select [Single], then press the SET button. To copy all images to a memory card, select [All].
AgfaPhoto DC-2030m Setting the DPOF The Digital Print Order Format (DPOF) setting allows you to select images on the memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer. 1 Turn the power on, and set the camera to the PLAYBACK mode 2 page 13). ( Open the menu.
AgfaPhoto DC-2030m Choosing a Startup Image 1 Turn the power on, and set the camera to the PLAYBACK mode ( 2 page 13). Open the menu. y Press the MENU button, then use the four-way control to select Start-up ) and press the SET button. Image ( 3 Press or to select the image you want, then press the SET button to apply the choice. y 4 5 A message “Completed” appears. Set the camera to the Setup Menu ( Press or to select Start-up Image ( 6 page 17). ) then press or the SET button.
AgfaPhoto DC-2030m Making Connections Connecting the Camera to a TV You can display recorded images on a television with a supplied AV cable. 1 2 3 Set the TV out to match the TV system that you are using ( page 19). Turn off the camera and the TV. Use the supplied AV cable to connect the camera to the TV set. 4 Set the TV input signal to Video In. y 5 Refer to the documentation included with your TV for more information. Display on TV.
AgfaPhoto DC-2030m Connecting the Camera to a PC There are two ways to download files from the camera’s internal memory or memory card to a computer: y Inserting the memory card into a card reader y Connecting the camera to a computer using the supplied USB cable Using the Card Reader 1 Eject the memory card from the camera and insert it in a card reader that is connected to a computer. 2 Open [My Computer] or [Windows Explorer] and double-click the removable drive icon that represents the memory card.
AgfaPhoto DC-2030m Appendix About the Folder & File Name Your digital camera automatically creates a directory of folders in the internal memory or memory card that it uses to organize still images, movie clips and other information. Folder Structure Your camera creates three directory names: y DICAM. All captured images, videos and audio files are stored in this folder except for files recorded using the Auction or YouTube® mode. y _AUCT. Captured images using the Auction mode are saved in this folder.
AgfaPhoto DC-2030m File Naming File name begins with “DSCI” and are followed by a 4-digit number that increases in sequence. File numbering starts from 0001 when a new folder is created. If the highest folder number is 999 and highest file number exceeds 9999, the camera will display the warning message “Folder cannot be created”. When it appears, try one of the following ways: y Reset the file number and plug in a new memory card.
AgfaPhoto DC-2030m Troubleshooting Problem Cause Solution Power does not turn on. Battery is inserted in the wrong Reload battery in the correct direction. direction. Batteries are dead. Replace or recharge batteries. The battery compartment door Make sure the battery compartment is open. door is securely closed. The camera does not The flash is charging. Wait for the flash to charge. take pictures. Memory is full. Insert a new memory card.
AgfaPhoto DC-2030m Specifications Sensor 12 megapixel CCD, Size : 1/2.3 inch Lens Focal length : f = 6.3 ( W ) ~ 18.9 ( T ) mm, 3X optical zoom, 4X digital zoom LCD Display 2.7” LCD Focus Range Normal: 0.4m ~ Infinity (All Zoom Step) / 0.1m ~ Infinity (at Wide only); Macro: (W) 10 cm ~ 80 cm / (T) 40 cm ~ 80 cm Aperture F/ 3.1 ( W ), 5.6 ( T ) Shutter 8 ~ 1/2000 sec. File Format Still Image: EXIF 2.2 compatible format ( JPEG compression ), DCF compatible.
AgfaPhoto DC-2030m Microphone Built-in Speaker Built-in Dimension Camera Body ( W x H x T ): 92 x 60.5 x 24.3 mm Weight Camera Body w/o battery : Approx. 115 (g) *These specifications are subject to change without notice.
AgfaPhoto DC-2030m Customer care More information on the complete AgfaPhoto digital camera product range can be found under www.plawa.com / www.plawausa.com. To return a product, you will need an RMA number which must be clearly visible on the returned shipment. You can find further information on the return of goods either by phoning our Support Hotlines or via the plawa website under the Menu item "Service & Support". Service & Repair (USA/ Canada): 1-866 475 2605 www.plawausa.
AgfaPhoto DC-2030m Copyright This manual contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. © Copyright 2008. Trademark Recognition Windows 98, 2000, ME, XP are registered trademarks of Microsoft Corporation in the United States and/or other countries.
AgfaPhoto DC-2030m communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
