Operation Manual

AgfaPhoto DC-2030m
20
Menu Item Functions
depending on your region.
[NTSC]:
[PAL]:
America, Japan and others
Europe, Oceania and others
USB
[Computer] / [Printer]:
Sets the USB mode to connect the camera with a printer or
computer (
page 57).
S.Image
Sets a recorded image as the start-up image (
page 55).
Format
To erase all data stored in the memory card if you are using a
card, or all data stored in the internal memory if there is no card
inserted.
y A “BUSY...PLEASE WAIT” message displays and the
memory card is starting format.
y A “COMPLETED” message displays when finish formatting.
y All data will be deleted including protected files. Be sure to
download important files to your computer before formatting.
[Off] / [On]:
LCD Save
Enable the LCD save function to automatically decrease the LCD
brightness to conserve battery power
When the camera is idle for 5 seconds, the LCD darkens.
To ensure the camera displays battery level correctly, set the
type to match the batteries used.
Battery Type
Alkaline / NiMH / Lithium / Qxyride
Reset All
Resets the entire menu and button operation settings to initial
default.
The following settings do not change after Reset All:
y Date & Time setting
y Language setting
y TV out setting
y Battery Type