User manual Microflex 102
Contents Disclaimer.......................................................................6 Trademark Recognition...............................................6 Federal Communications Commission (FCC) Compliance ....................................................................6 Declaration of Conformity ..........................................7 Disposal of Waste Equipment by Users in Private Households in the European Union .........................8 Precautions .......................................
2.5 Buttons & Functions .......................................21 2.6 About LED Indicators ......................................23 2.7 Initial Settings Before Use .............................23 2.7.1 Setting the Date and Time ......................23 3 LCD Display Information ..................... 25 3.1 3.2 3.3 4 In Movie Clip Mode...........................................25 In Voice Recording Mode ...............................27 In DSC Mode......................................................
6.1.1 6.1.2 6.1.3 6.1.4 6.1.5 6.1.6 6.1.7 6.1.8 6.1.9 Video Clip Resolution ..............................46 White Balance ..........................................47 Effect..........................................................48 Metering ....................................................49 Backlight....................................................50 Night Mode................................................51 Motion Detection ......................................52 EV Compensation .............
6.4.3 6.4.4 6.4.5 Autoplay ....................................................68 Rotate ........................................................69 DPOF.........................................................70 6.5 Settings Menu ...................................................71 6.5.1 Information ................................................71 6.5.2 Date / Time................................................72 6.5.3 Beep...........................................................72 6.5.4 Default ...
8 Installing the Software ......................... 88 9 Editing Software .................................... 89 10 Appendix ................................................. 90 Specifications ..............................................................90 Troubleshooting..........................................................92 Customer Care.............................................................
This manual is designed to assist you in using your new AgfaPhoto digital video camera. All information presented is as accurate as possible but is subject to change without notice. Disclaimer This manual contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it in to a designated collection point for the recycling of waste electrical and electronic equipment.
Precautions General precautions • • • • • • • • • Do not try to disassemble the product yourself, which may damage the product or cause electric shock. Keep the camera away from children and animals to prevent them from swallowing the batteries or small accessories. Stop using the camera if any kind of liquid or foreign object enters it. If this happens, power off the camera and contact your dealer for help. Do not operate the camera with wet hands: this may cause electric shock.
Power Supply • • • • • Be sure to use the type of battery or battery charger that is suitable for this camera. Using any other type of battery or battery charger may damage the equipment and render the guarantee void. Make sure the batteries are placed in the correct position. Error in the orientation of batteries may damage this product and result in fire. Remove the batteries to avoid leakage of battery fluid when the camera is not to be used for a long period of time.
1 General Introduction Please read this chapter carefully to understand the features and functions of this AgfaPhoto Microflex 102. This chapter also includes a description of system requirements, package contents and hardware components. 1.1 System Requirements In order to get the most out of your camera, your computer must meet the following system requirements: • Windows® Vista / XP / 2000 operating system or Mac OS 10.3 ~10.4 • Intel® Pentium 4 2.
1.3 Accessories Please check the contents of your camera package.
1.
1.5 Adjusting the LCD Display Before starting to take pictures or record movie clips, rotate the LCD Display according to the illustrations below.
2 Getting Started Expand your camera’s storage by using SD or SDHC memory cards. 2.1 Inserting an SD Card Insert an SD card with the label facing upwards . Note: Do not remove or insert an SD card when the camera is powered on to avoid damaging files. 2.2 Inserting the Batteries Use only the batteries provided or recommended by the manufacturer or dealer.
Note: Insert the batteries properly according to the description below. Inserting the batteries incorrectly could result in non-repairable damage to the camera. How to open the battery cover. Battery Status Indicator: Battery full Battery half full Battery empty Insert the Lithium-ion battery / 2 AA batteries according to the illustration.
*Important: Use the supplied lithium-ion battery when using the Infrared Night Vision function. This function is not supported when using AA batteries. 1. Close the battery cover.
2.3 Charging the Battery You can use the supplied battery charger to charge the lithium battery.
2.4 Using the Touchscreen 2.4.1 Single Touch The single touch function acts as a hotkey menu to adjust basic settings directly on the display: 1. Mode change to DV = Digital Video, DSC = Digital Still Camera and Voice Recording 2.
2.4.2 Scroll Scroll right or left to view the previous file or next file in Playback Mode. 2.4.3 Rotate In Playback Mode you can rotate the image in 90° steps as shown below.
2.5 Description Power Button Menu Button Buttons & Functions Button Function Press the Power Button to turn the camera ON/OFF. Press the Menu Button to display the main OSD (On Screen Display) menu. There are three operating Modes for the camera: Mode Button • DV Mode • DSC Mode and • Voice Recording Mode. Press the Mode Button to change to the different Modes.
4-Way Direction Button The 4-Way Direction Button allows you to access the various menus available from the OSD. • In DSC Mode: press the 4-Way Navigation Button UP to turn the flash light Mode options on/off: off, auto, fill-in; • In DV Mode: press the 4-Way Navigation Button UP to turn the Infrared Night Vision on/off • In Playback: press the 4-Way Navigation Button DOWN to delete a file. Recording Button Press the Recording Button to take movie clips and for voice recording.
on the LCD screen when the Macro Mode is selected. 2.6 About LED Indicators The following table describes the meaning of the camera's LED indicators: Indicator Color Power Definition Green Powering on. Red blinking Flash charging. Recording Red blinking Recording Self-timer Red blinking Start of Self-timer. 2.7 Initial Settings Before Use 2.7.1 Setting the Date and Time . 1. When powering on for the first time, set the camera to the SET Mode.
2. Press the 4-Way Direction Button left/right to highlight each column. Then press up/down or touch the screen to select the column. 3. Press the 4-Way Direction Button up/down to adjust the value. Press the SET Button to save the value you have changed or touch the screen to adjust the Year, Date and Time before pressing the Return Button ( ) to save the value and exit the setting.
3 LCD Display Information The high resolution 3.0” touchscreen display indicates all the important information on the camera settings as well as the visual image of your photo or video. 3.1 In Movie Clip Mode The following illustration shows the LCD display layout and icon description in the DV Mode ( ).
4 Exposure compensation 5 Color effect settings 6 Metering settings 7 Current memory for recording : SD card 1 : SD card 2 : Internal memory (appears when there is no SD card inserted) 8 Compensation indicator 9 Indicates macro is enabled 10 White balance settings 11 Battery level 12 00:00:00 Remaining recording time 13 Histogram indicator (graphical brightness distribution) 14 Playback Mode 15 Zoom 16 Indicates a menu button 17 Infrared Button (on, off) 26
18 Current resolution 19 Multi shot function 3.2 In Voice Recording Mode The following illustration shows the LCD display layout and icon description in the Voice Recording Mode ( ).
5 Playback Button 6 Menu Button 3.3 In DSC Mode The following illustration shows the LCD display layout and icon description in the DSC Mode ( ). 1 DSC Mode indicator 2 Night Mode (captures images with night scenery background).
: SD card 2 indicator : Internal memory (displayed when there is no SD card inserted) 7 Backlight compensation 8 Indicates macro is enabled 9 White balance settings 10 Battery level 11 0000 Remaining shots available.
4 Using the Camera 4.1 Recording Movie Clips 1. Set the camera to DV Mode: this is the default setting after you power on the camera. 2. Press the Recording Button to start and stop recording. 3. The camera will store the video clip automatically. DV Mode Indicator 4. The LCD screen ratio will be different depending on the video clip resolution setting.
Video Resolution Preview 16:9 ratio FULL HD (1920 x 1080) HD (1280 x 720) WVGA (848 x 480) 4:3 ratio WEB (320 x 240) 31
4.2 Capturing a Still Image from a Movie You can save a selected frame from a recorded movie as a still image. Select the video clip and press the Shutter Button at the frame you want. 1. 2. 3. 4. Set the camera to DV Mode Press the Recording Button to start or stop video recording. While recording videos, still images can be taken by pressing the shutter Button. The camera will store the image automatically.
1. When setting to FULL HD, HD or WVGA resolution, the LCD display aspect ratio is 16:9. 2. When setting to WEB video resolution, the LCD display aspect ratio is 4:3. 4.3 Capturing a Still Image in Video Mode You can save a selected frame in Video Mode as a still image. Press the Shutter Button at the preview image frame you want to save. You can also do this while recording a video clip. 1. 2. Press the Shutter Button in the movie clip during playback. The camera will store the image automatically.
Note: The image size is fixed depending on the image quality of the video clip. 1. When setting to FULL HD, HD or WVGA resolution, the LCD display aspect ratio is 16:9. 2. When setting to WEB video resolution, the LCD display aspect ratio is 4:3. 4.4 Voice Recording 1. Turn the camera on. 2. Press the MODE Button to enter the Voice Recording Mode or touch the screen hotkey. 3. Press the Recording Button to start or stop Voice Recording.
4.5 1. Movie Clip / Voice Clip Playback In Movie/Voice Recording Mode, press the Playback Button to display recently stored files on the LCD screen.
2. Press the 4-Way Direction Button up/down or left/right to view the stored file. Press the SET Button to play back or touch the screen to select Playback of the file. 3. To pause Playback of the file, press the Recording Button or touch the ( ) screen icon. 4. Press the Playback Button to return to Movie/Voice Recording Mode. 5. You can also play back the movie clip at a different speed by touching the ( ) screen icon ON/OFF.
Playback speed is as below when Slow Motion is ϘOFFϙ: Rewind Rewind Rewind Rewind 2X play 4X play 8X play 16X play Forward Forward Forward Forward Playback speed is as below when Slow Motion is “ON”: Rewind Rewind Rewind Rewind 1/2X play 1/4X play 1/8X play 1/16X play Forward Forward Forward Forward 4.6 Taking / Playing Back Photos 4.6.1 Taking Photos 1. Set the camera to the DSC Mode. 2. Press the Shutter Button to capture images.
DSC Mode indicator 4.6.2 Playing Back Photos 1. Set the camera to the DSC Mode and press the Playback Button to display the images on the LCD screen.
Playback Playback Mode Indicator 2. Press the 4-Way Direction Button up/down or left/right to view the saved files. Press the SET Button to replay or touch the screen to play back. 3. Press the SET Button or touch the screen to return to full screen to view images.
4. or ) panel icon to enlarge or shrink the Touch the ( image. You can then move the image up/down or left/right. 5. Press the Playback Button again to return to the DSC Mode.
5 LCD Display Information 5.1 Movie Clip Recording Mode Please refer to the following table showing the description of each icon and symbol.
7 Sound volume touch icons 8 Return Button 9 Indicates fast forward Playback Button 10 Playback/Pause Button 11 Fast rewind Playback Button 12 Menu Button 13 Resolution indicator 14 Slow motion Playback 42
5.2 Voice Recording Mode Please refer to the following table showing the description of each icon and symbol.
5.3 DSC Playback Mode Please refer to the following illustration to familiarize yourself with icons and symbols of the DSC Playback Mode.
6 Displays white balance settings 7 Indicates battery level 8 000-0000 Indicates file number 9 Return Button 10 Zoom- In indicator 11 Zoom- Out indicator 12 Menu Button 13 Resolution indicator 45
6 Menu Mode When a menu screen is displayed, the MENU Button is used to move through the highlighted items in the submenu or to select a menu item. 6.1 Menu Options in Movie Clip Mode Set your camera to Movie Clip Mode and press the MENU Button to show the Movie options menu. 6.1.1 Video Clip Resolution 1. Set the camera to the DV Mode. 2. Press the MENU Button and press the 4-Way Direction Button to highlight the Resolution item.
WVGA 848 x 480 WEB 320 x 240 Note: 1. When setting to FULL HD, HD or WVGA resolution, the LCD display aspect ratio is 16:9. 2. When setting to WEB video resolution, the LCD display aspect ratio is 4:3. 6.1.2 White Balance The White Balance function allows you to adjust the camera setting according to the white light. 1. Turn on the camera and make sure it is in the DV Mode. 2. Press the SET MENU Button and move the 4-Way Direction Button to highlight the White Balance item.
Auto The camera automatically adjusts the white balance. Daylight This setting is suitable for outdoor recording in daylight. Cloudy This setting is suitable for recording in cloudy or shady environments. Fluorescent This setting is suitable for indoors with fluorescent lamp lighting, or environments with high color temperatures. Tungsten This setting is suitable for indoors with incandescent lamp lighting, or environments with low color temperatures. 6.1.
Normal Make recordings in nature colors B&W Make recordings in B&W (Black and White) colors Sepia Make recordings in Sepia-toned colors 6.1.4 Metering The Metering function lets you select the area of the subject or frame by which the camera measures the light to record movies. 1. Turn on the camera and make sure it is in the DV Mode. 2. Press the MENU Button and move the 4-Way Direction Button to highlight the Metering item.
Spot This setting is to ensure correct exposure for the object even if the background is very bright or very dark. Center Use this setting to preserve background details whilst letting the lighting conditions at the center of the frame define the exposure. Touch AE Tap this item to correct exposure. 6.1.5 Backlight 1. Turn on the camera and make sure it is in the DV Mode. 2. Press the MENU Button and move the 4-Way Direction Button to highlight the Backlight item.
6.1.6 Night Mode This function is used to capture videos with night scenery backgrounds. 1. Turn on the camera and make sure it is in the DV Mode. 2. Press the MENU Button and press the 4-Way Direction Button to highlight the Night Mode item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to select On or Off. Press the SET Button to confirm or touch the screen to select the item.
6.1.7 Motion Detection When the Motion Detection function is turned on, the camera will detect any movement for Movie Clip recording without human intervention. When the AE variation is detected, recording will start immediately. 1. Turn on the camera and make sure it is in the DV Mode. 2. Press the MENU Button and move the 4-Way Direction Button to highlight the Motion Detection item. Press the SET Button to display the submenu or touch the screen to select the item. 3.
6.1.8 EV Compensation EV stands for Exposure Value. In difficult lighting condition, the auto exposure function of your camera may be misled into giving the wrong readings. You can adjust the value of the exposure compensation which ranges from -2.0EV to +2.0EV (in 0.5EV increments). The higher the EV value, the brighter the image will be. 1. Turn on the camera and make sure it is in the DV Mode. 2. Press the MENU Button and move the 4-Way Direction Button to highlight the EV Compensation item.
6.1.9 Multi Shot 1. Turn on the camera and make sure it is in the DV Mode. 2. Press the MENU Button and press the 4-Way Direction Button to highlight the Multi shot item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to select On or Off. Press the SET Button to confirm or touch the screen to select the item.
6.2 Movie Clip/Voice Playback Menus 6.2.1 . Delete The delete function allows you to remove unwanted files. 1. Turn on the camera and make sure it is in the Movie Clip/Voice Playback Mode. 2. Press the MENU Button and move the 4-Way Direction Button to highlight the Delete item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Use the 4-Way Direction Button to select Delete One or Delete All. Press the SET Button to confirm or touch the screen to select the item.
Delete One Delete the current file Delete All Delete all files Note: Files cannot be retrieved once deleted. Therefore please make sure you have backed up the files before deleting. Protected files cannot be deleted. To delete these, you must first unlock the file. 6.2.2 Protect The Protect function allows you to lock video or audio files. 1. Turn on the camera and make sure it is in the Movie Clip/Voice Playback Mode. 2.
Protect Lock Note: To unlock a protected file, repeat the above steps. When the file is no longer protected, the Locked icon will disappear. 6.2.3 Infrared Night Vision This function provides users with incredible vision in total darkness and the improvement of vision in low light environments. The function is supported under Video Mode only. Range: < 1.5m 6.3 Camera Mode Menu Options 6.3.
1. Set the camera to the DSC Mode. 2. Press the MENU Button and move the 4-Way Direction Button to highlight the Resolution item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to select 16M, 8M, 5M or 3M. Press the SET Button to confirm or touch the screen to select the item. 16M 4608 x 3456 pixels (Interpolation) 8M 3200 x 2400 pixels (Interpolation) 5M 2592 x 1944 pixels 3M 2048 x 1536 pixels 6.3.
3. Use the 4-Way Direction Button to select Auto, Daylight, Cloudy, Fluorescent or Tungsten. Press the SET Button to confirm or touch the screen to select the item. 6.3.3 Effect The Effect function allows you to take standard color images, Black & White or Sepia color tone images. 1. Set the camera to the DSC Mode. 2. Press the MENU Button and move the 4-Way Direction Button to highlight the Effect item. Press SET Button to display the submenu or touch the screen to select the item. 3.
6.3.4 Metering The Metering function allows you to select the area of the subject or frame by which the camera measures light to record images. 1. Set the camera to the DSC Mode. 2. Press the MENU Button and move the 4-Way Direction Button to highlight the Metering item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to select Spot, Center or Touch AE. Press the SET Button to confirm or touch the screen to select the item.
6.3.5 Backlight 1. Turn on the camera and make sure it is in the DSC Mode. 2. Press the MENU Button and move the 4-Way Direction Button to highlight the Backlight item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to select ON or OFF. Press the SET Button to confirm or touch the screen to select the item. 6.3.6 Night Mode 1. Set the camera to the DSC Mode. 2.
6.3.7 Self-Timer 1. Set the camera to the DSC Mode. 2. Press the MENU Button and use the 4-Way Direction Button to highlight the Self-timer item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to select OFF, 2 Sec or 10 sec. Press the SET Button to confirm or touch the screen to select the item.
2 sec. Self-timer: The image will be taken 2 seconds after the shutter is released. 10 sec. Self-timer: The image will be taken 10 seconds after the shutter is released. 6.3.8 Continuous Shot You can continuously record three pictures using this function, started by pressing and holding the Shutter Button and ending automatically after taking the third picture. 1. Set the camera to the DSC Mode. 2. Press the MENU Button and press the 4-Way Direction Button to highlight the Continuous Shot item.
6.3.9 EV Compensation You can adjust the value of the exposure compensation which ranges from -2.0EV to +2.0EV (in 0.5EV increments). The higher the EV value, the brighter the image will be. 1. Set the camera to the DSC Mode. 2. Press the MENU Button and press the 4-Way Direction Button to highlight the EV Compression item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to adjust the exposure value (-2.0 ~ +2.0).
6.4 Playback Menus 6.4.1 Delete Use this function to delete files. 1. Set the camera to the Playback Mode. 2. Press the MENU Button and press the 4-Way Direction Button down or touch the screen to select the file to be deleted or to delete all files. 3. Press the 4-Way Direction Button or touch the screen to select “Delete One” or “Delete All” to display the submenu.
4. Press the 4-Way Direction Button or touch the screen to select “O” Yes or “X” No and press the SET Button to delete file(s). Note: Files cannot be retrieved once deleted. Therefore please make sure you have backed up the files before deleting. Protected files cannot be deleted. To delete these, you must first unlock the file.
6.4.2 Protect 1. Turn on the camera and switch to the Playback Mode. 2. Select the file you want to protect. 3. Press the MENU Button and move the 4-Way Direction Button to highlight the Protect item. Press the SET Button to display the submenu or touch the screen to select the item. 4. Press the 4-Way Direction Button or touch the screen to select the item. Press the SET Button or touch the screen to confirm. The Locked icon will be displayed to indicate the file is protected.
6.4.3 Autoplay You can set the camera to display images in a slide show at a regular interval. 1. Set the camera to the Playback Mode. 2. Press the MENU Button and move the 4-Way Direction Button to select Autoplay. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button or touch the screen to select "Off", "1sec" or "3 sec". The images will be displayed automatically.
6.4.4 Rotate 1. Set the camera to the Playback Mode. 2. Use the 4-Way Direction Button to highlight the Rotate item and press the SET Button or touch the screen to select Left 90º or Right 90º.
6.4.5 DPOF The Digital Print Order Format (DPOF) setting allows you to select images on the memory card for printing and specify the number of print copies in advance using the camera. 1. Set the camera to the Playback Mode. Press the Playback Button and press the SET Button to display the Image Playback Menu or touch the screen to select the item. 2. Use the 4-Way Direction Button to highlight the DPOF item. Press the SET Button or touch the screen to display the submenu. 3.
4. Press the Playback Button or touch the screen to exit the image. Note: 1. A memory card is required for the DPOF function. 2. If DPOF is set, the pictures to be printed are ordered to print. 6.5 Settings Menu The Settings Menu can be used to select all kinds of camera settings. 6.5.1 Information This function can be used to display information on the LCD screen to help you capture the best images and movie clips. 1. Turn the camera power on and switch to the SET Mode. 2.
6.5.2 Date / Time Please refer to 2.7.1, 'Setting the Date and Time' on page 23. 6.5.3 1. Beep Turn the camera power on and switch to the SET Mode. Press the 4-Way Direction Button up or down to highlight the Beep and press the SET Button to confirm or touch the screen to select.
2. Use the 4-Way Direction Button or touch the screen to select On or Off. 6.5.4 Default Use this function to reset all settings to default settings. 1. Turn the camera power on and switch to the SET Mode. 2. Press the 4-Way Direction Button to highlight the Default item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Use the 4-Way Direction Button or touch the screen to select “O” Yes or “X” No.
6.5.5 TV Standard Use the TV standard to set the TV system for your area. 1. Turn the camera power on and switch to the SET Mode. 2. Use the 4-Way Direction Button to highlight the TV standard item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Use the 4-Way Direction Button to select NTSC or PAL. Press the SET Button to confirm or touch the screen to select the item.
6.5.6 USB This setting is for the USB output function. You can select an external device to connect the camera to using the supplied USB cable. 1. Turn the camera power on and switch to the SET Mode. 2. Press the 4-Way Direction Button to highlight the USB item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Use the 4-Way Direction Button to select PC Camera or Mass Storage. Press the SET Button to confirm or touch the screen to select the item. 6.5.
3. Press the 4-Way Direction Button to select OFF, 3 mins, or 5 mins or touch the screen to select the item. 6.5.8 Frequency Use the Frequency option to set the frequency system for your area. 1. Turn the camera power on and switch to the SET Mode. 2. Use the 4-Way Direction Button to highlight the Frequency selection item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Use the 4-Way Direction Button to select 50 Hz or 60 Hz.
Frequency setting reference: 50HZ UK, Germany, Spain, Italy, France, Netherlands, Portugal, Russia, China, Japan 60HZ USA, Taiwan, Korea, Japan 6.5.9 1. Language Turn the camera power on and switch to the SET Mode. Move the 4-Way Direction Button up/down to highlight the Language item and press the SET Button to confirm or touch the screen to select. 2.
6.5.10 Format This function allows you to format the memory card or the built-in memory. 1. Turn the camera power on and switch to the SET Mode. 2. Press the 4-Way Direction Button to highlight the Format item. Press the SET Button or touch the screen to display the submenu. 3. Press the 4-Way Direction Button to select “O” Yes or “X” No. Press the SET Button to confirm or touch the screen to select the item. 4.
Note: All data stored on the memory card or flash memory will be deleted after formatting. 6.5.11 File Number (Default: Series) This setting allows you to name the files. If “Series” is selected, the file number will follow the last stored file consecutively. If “Reset” is selected, the next file number will start from 0001 even after formatting, deleting or inserting a new memory card. 1. Turn the camera power on and switch to the SET Mode. 2.
6.5.12 LCD Brightness This function can be used to adjust the screen brightness. 1. Turn the camera power on and switch to the SET Mode. 2. Use the 4-Way Direction Button to highlight the LCD brightness item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to select High, Medium, or Low. Press the SET Button to confirm or touch the screen to select the item.
6.5.13 Instant Review This function can be used to instantly browse files after taking the picture. 1. Turn the camera power on and switch to the SET Mode. 2. Press the 4-Way Direction Button to highlight the Instant Review item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to select 1 sec, 3 sec, or 5 sec. Press the SET Button to confirm or touch the screen to select the item.
6.5.14 Memory This camera supports 2 x 32 GB SD/ SDHC cards. Use this function to select the data storage location. 1. Turn the camera power on and switch to the SET Mode. 2. Press the 4-Way Direction Button to highlight the Memory item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to select Internal, SD1, or SD2. Press the SET Button to confirm or touch the screen to select the item.
6.5.15 Volume Use this function to adjust the sound volume. 1. Turn the camera power on and switch to the SET Mode. 2. Press the 4-Way Direction Button to highlight the Volume item. Press the SET Button to display the submenu or touch the screen to select the item. 3. Press the 4-Way Direction Button to select High, Medium, or Low. Press the SET Button to confirm or touch the screen to select the item.
6.5.16 Start-Up Logo Use this function to select the image that is displayed on the LCD when the digital camcorder is turned on. 1. Turn on the camera and switch to the Setup Menu. 2. Press the 4-Way Direction Button to highlight the Start-up Logo item. Press the SET Button or touch the icon on the screen to display the submenu. 3. Press the 4-Way Direction Button to select Default or User Setting. Press the SET Button or touch the screen to select the item.
6.5.17 Face Detection You can use the Face Detection function to automatically detect faces in a scene during a photo shoot 1. Turn on the camera and switch to the Setup Menu. 2. Press the 4-Way Direction Button to highlight the Face Detection item. Press the SET Button or touch the icon on the screen to display the submenu. 3. Press the 4-Way Direction Button to select “O” Yes or “X” No. Press the SET Button or touch the screen to select the item.
7 PC and TV Connection 7.1 Connecting to a Computer As shown in the illustration, use the USB cable provided to connect the camera to a PC for file transfer, or use the camera as a webcam for conferencing purpose. 7.2 Connecting to a Standard TV As shown in the illustration, use the video cable to connect the camera to a standard TV.
7.3 Connecting to an HD TV As shown in the illustration, use the HDMI cable provided to connect the Digital Video Camera to an HD TV for high resolution picture display.
8 Installing the Software The bundled software CD has the drivers and software that come with the camera. Insert the CD into your CD-ROM drive. The autorun menu appears: 1. Insert the supplied CD ROM into the CD player. 2. If the CD does not execute automatically, please use Windows File Manager to execute the Install_CD.exe file on the CD. The following screen will be displayed. 3. Tap the desired menu item to start the installation process and follow the on-screen instructions.
9 Editing Software ArcSoft TotalMedia Extreme® manages your media for you, and gives you tons of fun and exciting ways to create and share projects featuring your photo, video, and music files. Edit, enhance and add creative effects to your photos. You can: Create your own movies or photo slide shows complete with soundtrack. Upload your files easily to YouTube®! Share them through simple email attachments or popular photo printing. Go to http://www.arcsoft.com/ for more information.
10 Appendix Specifications Image sensor 1/2.5 inch. 5.0 mega pixels CMOS sensor Effective pixels 5.03 Megapixels (2592 x 1944) Storage media Built-in 32 MB Flash memory External memory: SD card (4 GB) / SDHC (32 GB) card slot is supported ISO Equipment Auto Color effect Normal/BW/Sepia Lens Fixed lens F/3.2, f=7.5mm Focus range Normal: 1.2m~infinity Macro: 20cm Still image Format: JPEG (DPOF, EXIF) Resolution: 3MP, 5MP, 8MP, 16MP (interpolation) Scene Mode: Auto Movie Clip Format: H.
Audio Audio for Voice Recording: ADPCM LCD Display 3.0” Touchscreen display (16:9) Flash light Range: < 1.0m DSC: On/Off IR Night Vision Range: < 1.5m Video Mode: On/Off White balance Auto / Daylight / Cloudy / Tungsten / Fluorescent Exposure -2.0 EV~+2.0 EV Self-Timer Off, 2 seconds, 10 seconds. Interface Digital output connector: USB 2.0 high-speed (480Mbps Max.
Troubleshooting Problem Cannot power on camera. Possible Cause 1. Batteries are not inserted correctly. 2. Batteries are exhausted. Camera shuts down suddenly. Solution 1. Insert batteries correctly. 2. Replace batteries. 1. Power on again. 1. Power Saving Mode is activated. 2. Replace batteries. 2. Battery exhausted. Pictures are not stored on the memory. Powers off before storing the images. Camera shuts down when using Self-timer. Batteries in camera are exhausted. Images are out of focus.
card. protected. 2. Memory card contains non-DCF images taken by other cameras. Buttons do not work or camera hangs. A short circuit has occurred when connecting the camera to another device. 93 2. Reformat the memory card. Make sure you backup the files before reformatting the memory card. Remove batteries from the camera and reinsert again.
Customer Care More information on the complete AgfaPhoto digital camera product range can be found at www.agfaphoto.com / www.plawa.com Service & Repair Hotline (EU): 00800 752 921 00 (from a landline only) Service & Support Hotline (Germany): 0900 1000 042 (1.49 euro / min. from a German landline only) Service & Repair Hotline (UK): +44 1908 488676 Online Service / International contact: support-apdc@plawa.com Manufactured by plawa-feinwerktechnik GmbH & Co.
AgfaPhoto is used under license of Agfa-Gevaert NV & Co. KG or Agfa-Gevaert NV. Neither Agfa-Gevaert NV & Co. KG nor AgfaGevaert NV manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer. For service, support and warranty information, contact the distributor or manufacturer. All other brands and product names are registered trademarks of their respective owners.
