OPTIMA 8328m User manual
AgfaPhoto OPTIMA 8328m Thank you for purchasing this AgfaPhoto digital camera. Please read these operating instructions carefully in order to use the digital camera correctly. Keep the instructions in a safe place after reading so that you can refer to them later. Precautions • Do not aim the camera directly into the sun or other intense light sources which could damage your eyesight. • Do not try to open the case of the camera or attempt to modify this camera in any way.
AgfaPhoto OPTIMA 8328m Contents PRECAUTIONS I USING THE Q MODE 23 DISCLAIMER I SETTING IMAGE SIZE AND QUALITY 24 USING THE ZOOM FUNCTION 25 USING THE FLASH 26 USING THE MACRO 27 GETTING STARTED 1 USING THIS MENU 1 USING THE SELF-TIMER & BURST 28 SCOPE OF DELIVERY 2 USING THE APERTURE PRIORITY 29 PARTS OF THE CAMERA 3 USING THE SHUTTER PRIORITY 29 INSERTING THE BATTERIES 5 USING THE MANUAL EXPOSURE 30 LOW BATTERY INDICATOR 5 USING THE SMILE CAPTURE 30 CHARGING THE BATTERY
AgfaPhoto OPTIMA 8328m VIEWING IN THUMBNAIL 41 USERS IN PRIVATE HOUSEHOLDS IN THE PLAYING A SLIDE SHOW 41 EUROPEAN UNION 65 42 FCC COMPLIANCE AND ADVISORY 65 DELETING A SINGLE FILE 42 DECLARATION OF CONFORMITY 66 DELETING MULTIPLE FILES 43 DELETING ALL FILES 44 PROTECTING A SINGLE FILE 44 PROTECTING ALL FILES 45 PROTECTING MULTIPLE FILES 45 DELETING FILES EDITING IMAGES 46 ROTATING STILL IMAGES 46 CHANGING THE IMAGE SIZE 46 CHANGING THE IMAGE WITH EFFECTS 47 CHOOSING THE IMAG
AgfaPhoto OPTIMA 8328m Getting Started Using This Menu Getting Started This section contains information you should know before using this camera. Basic Operation This section explains all recording features of this camera. Basic Recording This section explains how to record still images, movies, and audio files. Other Recording Functions This section explains common operations about recording images.
AgfaPhoto OPTIMA 8328m Scope of Delivery AgfaPhoto OPTIMA 8328m USB Cable AV Cable Soft Case Hand Strap Rechargeable Lithium-ion Battery Software Installation Quick Start Guide Battery Charger CD-ROM Adaptor Caution y Note that the shape of the charger plug depends on the area where you purchased the camera. y Do not swing the camera around by the strap.
AgfaPhoto OPTIMA 8328m Parts of the Camera 1. AF Lamp / Self-timer Lamp 2. Flash ( page 26) 3. Lens 4. Microphone 5. Operation Lamp page 25) 6. Zoom Button ( y Thumbnail ( y Playback Zoom ( page 41) page 40) 7. Playback Button ( page 14) 8. Menu Button ( page 17) 9. Mode Button ( page 14) 10. ASM Button ( page 16) y Delete Button ( page 42) 11. LCD Monitor ( page 10) 12. Flash Button ( page 26) 13. SET/DISP Button ( page 12) 14.
AgfaPhoto OPTIMA 8328m 15. Shutter Button ( page 22, 31) 16. Power Button ( page 13) 17. Strap Ring 18. USB/AV Terminal ( page 20, 52) 19. Speaker 20. Tripod Socket 21.
AgfaPhoto OPTIMA 8328m Inserting the Batteries The camera is powered by a rechargeable lithium-ion battery (Li-Ion 820 mAh). 1 Open the battery cover. y Slide the battery cover in the direction indicated by the arrow. 2 Insert the batteries. y Install the battery with the terminal facing inside the camera. 3 Close the battery cover. Low Battery Indicator A low battery indicator appears on the LCD screen when the batteries are nearly exhausted.
AgfaPhoto OPTIMA 8328m Charging the Battery Pack The battery is not charged when you purchase the camera. You need to charge the battery before using the camera 1 Place the battery pack in the charger with the label facing up. 2 Connect the AC adaptor to the charger, and then plug it into a power outlet. y The charger lamp lights red and battery charging begins. When charging is completed, the lamp becomes green.
AgfaPhoto OPTIMA 8328m Inserting the Memory Card You can use SD cards with this digital camera. The memory card slot is located beneath the battery cover, adjacent to the battery compartment. 1 Open the battery cover. y Slide the battery cover in the direction indicated by the arrow. 2 Insert the card. y Insert the card with the label facing up and the arrow pointing in. Tips y To remove the card, gently press on the edge of the card and release it. Pull the card out and close the battery cover.
AgfaPhoto OPTIMA 8328m About Camera Memory This camera is equipped with internal memory. If the memory card is not inserted in the camera, all images and movie clips recorded by the camera will be stored in the internal memory. If the memory card is inserted, images and movie clips are stored on the memory card. DCF Protocol The DCF protocol defines the format for image file data as well as the directory structure for the memory card.
AgfaPhoto OPTIMA 8328m Setting the Date & Time 1 Turn the power on, and set the camera to the Setup Menu ( 2 page 18). Select [ y Press Date & Time]. or to select [Date & Time] then press or the SET button to launch the submenu. 3 Set date and time. y Press or to change the value of the cursor located. Press or to move the cursor between settings. Tips y Holding down y For date stamp setting ( 4 or changes the values continuously. page 38). Apply the setting.
AgfaPhoto OPTIMA 8328m Using the LCD Monitor The LCD monitor is used to compose images while recording, adjust settings and replay images. The following indicators may appear on the LCD monitor while recording or playing back images.
AgfaPhoto OPTIMA 8328m Playback mode 7 Recording info ( 8 Histogram 9 Captured date & time File number / Total 10 Voice memo control ( 5 Battery ( 11 DPOF ( 6 Storage media 12 Resolution ( 1 Playback mode ( 2 Protect ( 3 Voice memo ( 4 page 14) page 44) page 34) page 5) page 12) page 34) page 49) page 24) Caution y Some information may not display correctly if you display images captured by other camera models.
AgfaPhoto OPTIMA 8328m Changing the LCD Status Pressing the SET/DISP button changes the LCD status as shown below: REC mode (A) OSD on (B) Full OSD (C) Guide line (D) OSD off Tips y Use the “Guide line” to compose images easily before shooting images.
AgfaPhoto OPTIMA 8328m Basic Operation Turning the Power On and Off 1 Press the POWER button (n) to turn on the camera in the REC mode. y The power turns on, the lens extends and the LED lights in green. Press the Playback button (o) to turn on the camera in the Playback mode. y The power turns on, and an image displays on the LCD monitor (p). 2 Press the POWER button (n) again to turn the power off. y The power turns off, the lens retracts and the LED turns off.
AgfaPhoto OPTIMA 8328m Changing the Mode You can record images and voices in the REC mode. Use the Playback mode to replay, delete, or edit images on the LCD monitor. Switching between REC mode & Playback mode In REC mode: press the Playback button (n) to switch to the PLAY mode. In PLAY mode: press the Playback (n) or the MODE (o) button to switch to the REC mode. Selecting the REC mode 1 Set the camera to the REC mode ( 2 page 14). Launch the mode palette.
AgfaPhoto OPTIMA 8328m Display Title Portrait Landscape Sunset Description Blurring the background to focus on the subject. Used for the wide scenic views. Enhance the red hue for recording sunset images. Backlight Shooting the image of backlight object by changing metering. Smile Capture Capture the most brilliant smile of characters. Kids Night Scene Fireworks Take a still image to capture moving kids. Shooting the subject while keeping the background night scenery.
AgfaPhoto OPTIMA 8328m Selecting the ASM mode 1 Set the camera to the REC mode ( page 14). y It cannot be switched to ASM mode while in Movie or Voice REC mode. 2 Launch the ASM mode. y Press the ASM button (n) to toggle between Aperture Priority, Shutter Priority, Manual Exposure mode. y For detail operation ( page 26). 3 Exit the ASM mode. y Use the ASM jog wheel or the display mode button to select the scene first and then a recording mode. ( 16 page 14).
AgfaPhoto OPTIMA 8328m Using the Menus When a menu is displayed, the four-way control and the SET button are used to make the desired settings. REC menu 1 Turn the power on, and set the camera to the REC mode ( 2 page 14). Open the REC menu. y Press the MENU button (n) to display the menu. 3 Select an item. y Press or 4 (o) to select a menu item. Change the setting. y 5 Press or (o) to change the setting. Press the MENU (n) or the SET (o) button to save the settings and close the menu.
AgfaPhoto OPTIMA 8328m Date Stamp Off / Date / Date & Time 38 Digital Zoom Off / On 25 Stabilizer Off / On 38 Face Tracking Off / On 38 Photo Frame Off / Frame 1 ~ 10 38 AF Lamp Auto / Off 39 REC menu list (Movie) Menu Item Available Settings Movie Size / Metering White Balance / / / Auto / / Page 32 / 35 / / / / 35 Setup menu 1 Turn the power on, and set the camera to the REC or Playback mode ( 2 page 14). Press the MENU button (n) to open the REC or Playback menu.
AgfaPhoto OPTIMA 8328m 4 Select an item. y Press or (o) to select a menu item and then press or the SET (o) button to launch the submenu. 5 Select an item. Press or or the SET (o) (o) to select a menu item and then press button to launch the submenu. Change the setting. y Press or (o) to select an option and press or the SET (o) button to apply the setting. 6 Press the MENU (n) button to close the menu. Setup menu list Menu Item Functions [Shutter]: Sets the shutter sound on and off.
AgfaPhoto OPTIMA 8328m Menu Item Functions [English]: English [Deutsch]: German [繁體中文]: T. Chinese [Italiano]: Italian [Español]: Spanish [Nederlands]: Dutch [Français]: French [Magyar]: Hungarian [Português]: Portuguese [Türkçe]: Turkish [Čestina]: Czech [Svenska]: Swedish [Polski]: Polish [Rumänisch]:Romanian [Русский]: Russian []يبرع: Arabic [Ελληνικά]: Greek [ไทย ]:Thai [日本語]: Japanese [한국어]: Korean [简体中文]: S.
AgfaPhoto OPTIMA 8328m Menu Item Functions download important files to your computer before formatting. Resets the entire menu and button operation settings to initial default.
AgfaPhoto OPTIMA 8328m Basic Recording Recording Still Images 1 Turn the power on, and set the camera to the REC mode page 14). ( 2 Compose the subject on the monitor. y Aim the focus area (n) to the subject that you want to take. 3 Half press the shutter button to focus the image. y The focus area (n) becomes green while in focus, then shutter speed (o), aperture value (p) and ISO value (q) are displayed.
AgfaPhoto OPTIMA 8328m Using the Q mode The Q mode provides a simplified camera interface. Larger icons and fewer controls make it easier to take pictures anytime, especially for the beginners and elderly users. You can use only the basic settings in the Q mode: Flash: Auto / Red eye / Force on / Slow sync / Force off Button Macro: Off / On SET/DISP: OSD on / Guide line / OSD off Resolution: 8M / 3:2 / 16:9 / 6M / 4M / 2M / VGA Drive Mode: Off / 2 sec. / 10 sec.
AgfaPhoto OPTIMA 8328m Setting Image Size and Quality You can select lower image resolution and quality to decrease the image size to capture more images. Choose a suitable setting according to the desired image quality and purpose. For details, see page 17. Resolution Values Image Size 3264 x 2448 Print Sizes Printing larger than A4-size. Larger Printing to postcards or attaching to e-mail.
AgfaPhoto OPTIMA 8328m Using the Zoom Function Your camera has a combination of optical and digital zoom functions that allows you to zoom in on far away subjects or zoom out for a wide angle shot. The optical zoom is achieved by mechanically adjusting the lens of the camera. The digital zoom enlarges or shrinks the image using a software process. 1 Select the zoom setting, and point the camera at the subject. 2 Press the zoom button (n) to compose the image. [W]: zoom out for a wide-angle shot.
AgfaPhoto OPTIMA 8328m Using the Flash The flash is not only for taking pictures when there is insufficient light, but also when the subject is in shade or in backlight conditions. Press the flash button to cycle your camera through the various flash modes. The flash will not activate when continuous shooting or movie recording. 1 Turn the power on, and set the camera to the REC mode ( 2 page 14). Press the flash button (n) to change the flash mode.
AgfaPhoto OPTIMA 8328m Using the Macro Your camera is equipped with a macro function that allows you to focus on very close subjects. In macro mode you can focus on subjects 15 cm from the lens when in the maximum wide angle setting and 40 cm in the maximum telephoto setting. 1 Turn the power on, and set the camera to the REC mode ( 2 page 14). Press the macro button (n) to enter the macro mode. y The macro icon (o) displays in the LCD monitor.
AgfaPhoto OPTIMA 8328m Using the Self-timer & Burst Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is shot. Use the burst to record continuous still images shooting. 1 Turn the power on, and set the camera to the REC mode ( 2 page 14). Open the REC menu ( y Use or page 17). to select [Drive mode] from the REC menu. 3 Change the setting. y Press or to select a drive mode, then press the SET button. Off: Record a single image. 2 sec.
AgfaPhoto OPTIMA 8328m Using the Aperture Priority In this mode, you can set an aperture value to match the brightness. A higher aperture value brings the background out of focus. Selecting a lower aperture value allows you to soften the background. 1 Turn the power on, and set the camera to the Aperture Priority ( 2 page 16). Adjust the aperture value by pressing 3 or button. Press shutter button to take a picture.
AgfaPhoto OPTIMA 8328m Using the Manual Exposure You can manually set the shutter speed and aperture to achieve a particular effect. 1 Turn the power on, and set the camera to the Manual Exposure ( 22 page 16). Use the SET button to switch between aperture value and shutter speed control. Press to adjust the setting. or 3 Press shutter button to take a picture. y Press the shutter button halfway, the difference between the standard exposure and the selected exposure appears in red.
AgfaPhoto OPTIMA 8328m Recording Movie Clips 1 Turn the power on, and set the camera to the Movie mode page 14). ( 2 Compose the subject on the monitor. y Aim the focus area (q) to the subject that you want to take. y The LCD monitor displays the available recording time (p). 3 Start recording. y Press the shutter button (n) to start recording. y Use the zoom button (o) to adjust the image size.
AgfaPhoto OPTIMA 8328m Setting the Movie Size Movie Size and Image Quality Icon Resolution Image Quality 720 x 400 - 640 x 480 High Quality 320 x 240 Normal 640 x 480 For YouTube® YouTube® Mode The YouTube® Mode allows you to record movies with predefined video settings for easy upload to the YouTube® website. 1 YouTube® supports two file upload standards: y Single File Uploader. The maximum movie file size is up to 100 MB. y YouTube® Uploader. The maximum movie file size is up to 1 GB.
AgfaPhoto OPTIMA 8328m Recording Audio Clips 1 Turn the power on, and set the camera to the Voice REC mode page 14). ( 2 Press the shutter button to start recording. y The voices are recorded from the microphone of the camera. Be careful to avoid touching the microphone while recording. 3 Press the shutter button again to end recording. y The camera will stop recording automatically when the memory capacity has been reached.
AgfaPhoto OPTIMA 8328m Recording a Voice Memo You can add a voice memo to still images. 1 Turn the power on, and set the camera to the Playback mode page 14). ( 2 Press or to select a still image that you want to add a voice memo. y If the image already has the voice memo recorded, the appears on the LCD monitor. The new recording will replace the previous one. 3 Open the Playback menu. y 4 Press the MENU button, using four-way control to select Voice Memo ( and press the SET button.
AgfaPhoto OPTIMA 8328m Other Recording Functions Setting the Metering There are 3 different light metering options available on your camera. Option Description Light is measured from the entire shooting screen, but gives more importance to the values near the center. Selects an exposure based on readings from multiple points in the subject area. Selects an exposure based on a single reading taken from the center of your picture.
AgfaPhoto OPTIMA 8328m Setting the ISO With the initial settings, the ISO sensitivity is automatically set according to the brightness of the subject. Option Auto Description Sets the ISO sensitivity automatically. ISO 50 Sets the sensitivity to ISO 50 equivalent. ISO 100 Sets the sensitivity to ISO 100 equivalent. ISO 200 Sets the sensitivity to ISO 200 equivalent. ISO 400 Sets the sensitivity to ISO 400 equivalent. ISO 800 Sets the sensitivity to ISO 800 equivalent.
AgfaPhoto OPTIMA 8328m Setting the Sharpness You can select whether you want the image to have sharp or soft outlines. Option Description The edges of the image are emphasized. The edges will become sharp, but noise may occur in the recording image. The edges of the image are sharp. This is suitable for printing. The edges of the image are softened. This is suitable for editing images on PC. Setting the Photo Effect You can add special effects to your images in Record mode or in Playback mode.
AgfaPhoto OPTIMA 8328m Setting Date Stamp The Date Stamp function can be used to add a date to your pictures as you take them. Option Off Date Date & Time Description Does not add the recorded date & time to printed images. Only adds the recorded date to printed images. Adds the recorded date & time to printed images.
AgfaPhoto OPTIMA 8328m Setting AF Lamp The AF Lamp function allows you record images in low light conditions. Option Description Off Disable the AF lamp while recording images. The AF lamp turns on automatically by half pressing the shutter Auto button under low light conditions. Playback Playing Back Images 1 Turn the power on, and set the camera to the Playback mode ( y page 14). The latest recorded image appears on the LCD monitor.
AgfaPhoto OPTIMA 8328m Playing Back Movie Clips 1 Turn the power on and set the camera to the Playback mode. ( 2 3 page 14). Press or to select a movie clip that you want to playback. Start playing back. y Press to start playing the movie clip. y Press to stop the movie clip, or press paused, press to pause it. When the movie again to resume. Tips y During movie playing back, press y Press the shutter to capture the still image from the movie clip while it had paused.
AgfaPhoto OPTIMA 8328m 5 Save the image. y Press the SET button (p) again to trim the selected image and save it as a new one. Viewing in Thumbnail 1 Turn the power on, and set the camera to the Playback mode ( 2 page 14). Press the zoom button [W], a thumbnail screen is displayed. 3 Use the four-way control to select the desired image, and press [T] or the SET button to show the selected image in full screen. Tips y You can protect or delete multiple images in thumbnail, see page 43, 45.
AgfaPhoto OPTIMA 8328m 4 Playing the slide show. y Press the SET button (o) to start the slideshow. y During the slideshow, press the SET button (o) to pause the slideshow and press the SET button again to resume. Deleting Files Deleting a Single File 1 Turn the power on, and set the camera to the Playback mode ( 2 page 14). Open the menu. y Press the MENU button (n), then use the four-way control (o) to select Delete ( ) and press the SET button (o).
AgfaPhoto OPTIMA 8328m Deleting Multiple Files 1 Turn the power on, and set the camera to the thumbnail screen ( 2 page 41). Open the menu. y Press the MENU button, then Press or to select to select Delete ( ) and press the SET button. 3 Press y 4 or to select [Select], and then press the SET button. The frame of the selected image turns green. Select multiple images. y Use the four-way control to select the image. y Pressing the SET button toggles the on and off.
AgfaPhoto OPTIMA 8328m Deleting All Files 1 Turn the power on, and set the camera to the Playback mode ( 2 page 14). Open the menu. y Press the MENU button, then use the four-way control to select Delete ( ) and press the SET button. y You can open the menu in full screen or in thumbnail. 3 Press 4 Press the SET button to delete all unprotected images. or to select [All], and then press the SET button.
AgfaPhoto OPTIMA 8328m Protecting All Files 1 Turn the power on, and set the camera to the Playback mode ( 2 page 14). Open the menu. y Press the MENU button, then use the four-way control to select Protect ( ) and press the SET button. y You can open the menu in full screen or in thumbnail. 3 Press y 4 or to select Lock all, and then press the SET button. To unlock all files, select Unlock all in this step, then press the SET button. Press the SET button to protect all images.
AgfaPhoto OPTIMA 8328m 5 Protect images. y Press the MENU button, then select [Yes] and press the SET button. All selected images will be protected. y To cancel protect, press the MENU button in this step. Editing Images Rotating Still Images 1 Turn the power on, and set the camera to the Playback mode ( 2 page 14). Press or to select the image you want to rotate. 3 Open the menu. y Press the MENU button, then use the four-way control to select Rotate ) and press the SET button.
AgfaPhoto OPTIMA 8328m 4 Press y or to select an option, and then press the SET button. The resized image will be saved as a new file. Caution y Only a large size image can be sized to a smaller one. Changing the Image with Effects You may use Red Eye Removal to remove red eyes caused by flash from original photo. 1 Or use color filters to save as a new image. Turn the power on, and set the camera to the Playback mode ( page 14). 2 Press 3 Open the menu. y ) and press the SET button.
AgfaPhoto OPTIMA 8328m Copying the Files You may copy the data from the camera’s internal memory to the memory card for convenience. 1 Be sure you have inserted a memory card into your digital camera. Set the camera to the Playback mode. page 14). ( 2 Open the menu. y Press the MENU button, then use the four-way control to select Copy to card ( ) and press the SET button. 3 Press y or to select [Single], then press the SET button. To copy all images to a memory card, select [All].
AgfaPhoto OPTIMA 8328m Setting the DPOF The Digital Print Order Format (DPOF) setting allows you to select images on the memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer. 1 Turn the power on, and set the camera to the Playback mode page 14). ( 2 Open the menu.
AgfaPhoto OPTIMA 8328m Choosing a Start-up Image 1 Turn the power on, and set the camera to the Playback mode page 14). ( 2 Open the menu. y Press the MENU button, then use the four-way control to select Start-up ) and press the SET button. Image ( 3 Press or to select the image you want, then press the SET button to apply the choice. y A message “Completed” appears. 4 Set the camera to the Setup Menu ( 5 Press or to select Start-up Image ( 6 page 18).
AgfaPhoto OPTIMA 8328m Making Connections Connecting the Camera to a TV You can display recorded images on a television with a supplied AV cable. 1 Set the TV out to match the TV system that you are using ( 2 Turn off the camera and the TV. 3 Use the supplied AV cable to connect the camera to the TV set. 4 Set the TV input signal to Video In. y 5 page 20). Refer to the documentation included with your TV for more information. Display on TV.
AgfaPhoto OPTIMA 8328m Connecting the Camera to a PC There are two ways to download files from the camera’s internal memory or memory card to a computer: y Inserting the memory card into a card reader y Connecting the camera to a computer using the supplied USB cable Using the Card Reader 1 Eject the memory card from the camera and insert it in a card reader that is connected to a computer.
AgfaPhoto OPTIMA 8328m Appendix About the Folder & File Name Your digital camera automatically creates a directory of folders in the internal memory or memory card that it uses to organize still images, movie clips and other information. Folder Structure Your camera creates three directory names: y DICAM. All captured images, videos and audio files are stored in this folder except for files recorded using the Auction or YouTube® mode. y _AUCT.
AgfaPhoto OPTIMA 8328m File Naming File name begins with “DSCI” and is followed by a 4-digit number that increases in sequence. File numbering starts from 0001 when a new folder is created. If the highest folder number is 999 and highest file number exceeds 9999, the camera will display the warning message “Folder cannot be created”. When it appears, try one of the following ways: y Reset the file number and plug in a new memory card.
AgfaPhoto OPTIMA 8328m Troubleshooting Problem Power does not turn on. Cause Solution Battery is inserted in the wrong Reload battery in the correct direction. direction. Batteries are dead. Replace or recharge batteries. The battery compartment door Make sure the battery is open. compartment door is securely closed. The camera does not take The flash is charging. Wait for the flash to charge. pictures. Memory is full. Insert a new memory card.
AgfaPhoto OPTIMA 8328m Specifications Sensor 8.0 megapixels CCD, Size : 1/2.5 inch Lens Focal length : f = 6.2 (W) ~ 18.6 (T) mm , 3x optical zoom, 4x digital zoom Display 2.7” LCD Focus Range Normal: 80 cm ~ Infinity ( from the tip of barrier ) Macro: (W) 15 cm ~ 80 cm / (T) 40 cm~ 80 cm ( from the tip of barrier ) Aperture F/ 2.8 ( W ), 5.1 ( T ) Shutter 8 ~ 1/2000 sec. File Format Still Image: EXIF 2.2 compatible format ( JPEG compression ), DCF compatible.
AgfaPhoto OPTIMA 8328m Speaker Built-in Dimensions Camera Body (W x H x T): 91.3 x 56.55 x 23 mm Weight Camera Body w/o battery: Approx. 120 (g) *These specifications are subject to change without notice.
Scene Mode ² ² z ² ² z ² ² z ² ² z ² ² z ² ² z ² ² z ² ² z ² ² ² z ² z ² ² ² ² z z ² ² ² z ² ² z ² z ² ² ² ² z ² ² z z ² ² z ² ² z ² ² z ² ² z ² ² z ² ² Focus 58 ² ² ² ² ² ² ² ² ² z O ² ² ² ² ² ² ² O z ² ² ² ² O ² ² ² z ² ² ² ² z ² ² z ² z ² ² ² O ² ² O z z ² ² ² O ² ² z ² ² ² ² ² z ² ² z ² ² z ² ² O ² ² z ² ² z ² O O ² ² z ² ² ² ² z O ² ² z ² ² z ² O O ² ² z ² ² ² ² ² z ² ² z ² z ² ² ² O ² ² z ² ² ² ² ² z ² ² z ² ² ² ² z O ² ² z ² ² z ² ² O ² ² z ²
² ² O O ² ² ² ² ² ² ² ² ² ² ² ² ² O O O O ² ² ² ² O O O O O ² ² ² ² O O O O O O ² ² ² ² O O O O O O O ² ² ² ² O O O O O O O O ² ² ² ² O O O O O O O O O ² ² ² ² O O O O O O O O O O ² ² ² ² O O O O O O O O O O ² ² ² ² O O O O O O O O O O ² ² ² ² O O O O O O O O O O ² ² ² ² O O O O O O O O O O ² ² ² ² O O O O O O O O O O ² ² ² ² O O O O O O O
² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² O O O O O O O O O O ² ² ² ² ² ² ² ² O z ² z ² ² ² ² ² ² z ² ² ² ² ² ² ² O z ² z ² ² ² ² ² ² z ² ² ² ² ² ² ² O z ² z ² ² ² ² ² ² z ² ² ² ² ² ² ² O z ² z ² ² ² ² ² ² z ² ² ² ² ² ² ² O z ² z ² ² ² ² ² ² z ² ² ² ² ² ² ² O z ² z ² ² ² ² ² ² z ² ² ² ² ² ² ² O z ² z ² ² ² ² ² ² z ² ² ² ² ² ² ² O z ² z ² ² ² ² ²
² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² z ² O O O O O z ² z ² ² ² ² z ² ² z ² O O O O O z ² z ² ² ² ² z ² ² z ² O O O O O z ² z ² ² ² z ² ² ² z ² O O O O O z ² z ² ² ² ² z ² ² z ² O O O O O z ² z ² ² ² ² z ² ² z ² O O O O O z ² z ² ² ² ² ² z ² z ² O O O O O z ² z ² ² ² ² z ² ² z ² O O O O O z ² z ² ² ² ² z ² ²
² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² z ² ² ² ² ² ² O O O O O z ² ² ² ² ² ² O O O O O z O O O O O O O O O O O z O O O O O O O O O O O z O O O O O O O O O z ² z O O O O O O O O O O O z O O O O O O O O O O O z O O O O O O O O O O O z O O O O O O O O O O O z O O O O O O O O O O O z ² ² ² ² ² ² O O O O O z ² ² ² ² ² ² O O O z ² z ² ²
² ² ² ² ² ² ² ² ² ² z ² O O O O O O z ² O O O O O O z ² O O O O O O z ² O O O O O O z ² O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O z ² O O O O z ² z ² O O O O O O O O O O O O O O z ² z ² O O O O O O O O O O O O z ² O O O O z ² z ² O O O O z ² O O O O O O O O O O O O z ² ² z O
AgfaPhoto OPTIMA 8328m Customer care More information on the complete AgfaPhoto digital camera product range can be found under www.plawa.com / www.plawausa.com Service & Repair (USA/ Canada): +1-866 475 2605 www.plawausa.com Support Service (USA/ Canada) support-apdc@plawausa.com Service & Repair Hotline (EU): 00800 752 921 00 (from a landline only) Service & Support Hotline (Germany): 0900 1000 042 (1.49 Euro/ min.
AgfaPhoto OPTIMA 8328m Copyright This manual contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. © Copyright 2008. Trademark Recognition Windows 98, 2000, ME, XP are registered trademarks of Microsoft Corporation in the United States and/or other countries.
AgfaPhoto OPTIMA 8328m used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. • Reorient or relocate the receiving antenna.
