System Telephone System Telephone ST 40 IP User Guide
User Instructions The digital System Phone ST 40 IP is intended for the connection to an AGFEO ISDN Telephone System with LAN Module 508 or LAN Module 510. The ST 40 IP can be connected to the following AGFEO ISDN Telephone Systems: - AS 43, AS 45, AS 200 IT from software 8.2 x Information on software upgrades may be obtained via your qualified dealer. AGFEO GmbH & Co. KG will not accept any liability for any damages as a result of improper use of the digital System Phone ST 40 IP.
System Telephone ST 40 IP Table of Contents User Instructions .................................................................................................................................. 2 Power Supply ......................................................................................................................................... 2 Safety Notes ..........................................................................................................................................
System Telephone ST 40 IP View of Base Modulslot 1 Modulslot 2 Headset Connection LAN-Connection LAN S0-TK Handset Connection Connection for optional Power Supply or Optional STE 40 Console Untangler Connection The ST 40 IP handset offers a compartment for the connection of a cord untangler. As the optional untangler is fitted inside the handset it will not interfere in normal use or when the receiver is put back on hook. - to open the handset cover , press the lid (arrow 1) and remove lid (arrow 2).
System Telephone ST 40 IP Display Position Your Display can be adjusted to 6 different viewing angles. Connection Connect the RJ 45 plug of the line cord of your ST 40 IP into a network socket which is connected to your network. Please note that the LAN module 508 / 510 must be part of this network. - Insert the RJ 45 plug into the socket until you hear a positive click.
System Telephone ST 40 IP ST 40 IP Buttons Softkeys Adjustable Graphic Display Speaker (below handset) 10 Function Buttons with LED's Mak eln 1 Firm Geb a Mak üh eln 2 Nac ren IHK Anruf ht sc HdR E. Pa hutz Konf sc er Durch hke J. Flie enz sa Sven ge Umle ja Ya ge ra Term Vers itung zu iche ine rung T.
System Telephone ST 40 IP Display Area of ST 40 IP Display in standby: WK26 Internal and external S0 Status, one box per S0. Tu 11.Jul.06 11:59 ii xx A *${}%“S Activated features are shown here Status of analogue trunk lines 12 14 16 18 Extensions off hook. Ringing extensions will be shown inverted. Current function of soft keys below. ok back 1. Display Line: Date / Time Index of functions: External ISDN-Line. One line (a Bchannel)is busy. The "x" is shown inverted on an external call.
System Telephone ST 40 IP Function Buttons - Freely programmable Function Buttons (overview) TAM activation Reject AIS Volume Call Waiting Enabled/off Call Filter Call Log Do not Disturb (DND) Tannoy Night Service (AVA 2) Call Forwarding Busy on Busy Call by Call Check in/out To switch the answering machine of an ST31/ST 40 on or off. Reject an incoming call. Caller will hear busy tone. Volume adjustment of AIS announcements via an external speaker. You can select if: - Caller will hear busy tone (off).
System Telephone ST 40 IP Function Buttons - Freely programmable Function Buttons (overview) Speaker Volume LCR Line Brokers Call Multifunction Adjust speaker volume for handsfree or on hook use. No Function If function is stored on the 2nd level, then pressing this button will cause the function of the 1st level to be carried out. You can allocate an account code to a call.
System Telephone ST 40 IP LED - Display for freely programmable function buttons LED on LED off LED flashes disabled No numbers in Call Log off New Numbers in Call Log Do Not Disturb enabled Call Log entries already viewed on Night Service Call Forwarding Busy on Busy Group Button Headset on set on Logged in active off off off Logged out off Withhold Number LCR Relays Mute Button Telephone Lock Appointment on on on enabled on set off off off disabled off off Ringer Off Doorphone and Lock Relea
System Telephone ST 40 IP LED - Display for freely programmable function buttons LED on LED off TAM Activation TAM switched on TAM switched off Extension Button (DSS) Extension is busy or off hook Line Button Line is currently in use Timer Button Timer is on, function is off Memory Dial Button LED flashes (slowly) LED flashes (fast) The button is allocated to an answering machine1).
System Telephone ST 40 IP Button Assignment In default all programmable buttons of the system phones are set identically. These buttons can be individual programmed to suit your specific application.
System Telephone ST 40 IP Call Waiting First Option: T P - A You are on a call and End current call hear the call waiting tone P + Waiting call will ring your phone P A Lift handset Talk Second Option: Press „SPLIT“. The first call is placed on hold while the waiting one is connected to you. You can alter between the calls by pressing the Split Button. You can also deflect the waiting call. Reject a Waiting Call P Press „Reject“.
System Telephone ST 40 IP Display Call Log The flashing message waiting button will indicate that there is one entry in the call log. With the receiver on hook press the message waiting button. The last missed call will be displayed giving telephone number, date and time. The LED will continue to be lit until you return the call or delete the entry from the call log. You can use the arrow keys to view further entries. y& The displayed number will be dialled as soon as you lift the handset.
System Telephone ST 40 IP Phonebook (Vanity retrieval) t z z + or Select the next letter,ie.N =6.The first entry with “An ”is displayed. Enter the desired letter,ie.A =2.The Press Phonebook first entry with the selected initial letter is displayed. button = Lift handset or press the handsfree button, the displayed name will automatically be dialled. Scroll with arrow buttons '& Phonebook (Alphabetic retrieval) t z z & Enter the desired Press Phonebook letter,ie.A =2.
System Telephone ST 40 IP Location Select a suitable location for the ST 40 IP to be installed. Please observe the following points: - Do not use locations where the phone could be subjected to water or chemicals. - Rubber feet of the Phone: Your phone has been manufactured for general use. Some chemicals found in furniture polish or other furniture care products may alter the substance of the rubber feet of the phone.
System Telephone ST 40 IP DHSG Headset (Cordless Headset) The DHSG connectivity is a new industry standard which is supported by various headset manufacturers. This bi-directional connection makes it possible to deliver a high functionality between telephone and headset from different manufacturers. The telephone can signal to the headset via the DHSG connection if it is on - or off hook and if the telephone is ringing. Likewise the headset is able to signal to the phone if it wants to be on - or off hook.
System Telephone ST 40 IP DSHG Headset Operation Please program a headset button for the ST 40 IP or STE 40 either via TK Suite Basic or the system programming code XX 31. - You now will be able to answer or clear a call from the headset. Your headset will also ring in the earpiece once your telephone rings. - You can answer the call by pressing the programmed headset button on the ST 40 IP or STE 40, or by pressing the button directly on your headset.
System Telephone ST 40 IP Setup ASIP via Browser It is possible to allocate the ST 40 IP to a LAN Module 508 / LAN Module 510 via the Browser. To do this please call up the following page „http://Telefon-IP/tkset“.
System Telephone ST 40 IP Network Setting of ST 40 IP via Browser Important network setting of the ST 40 IP can be carried out via the browser. To do this call up the page „http://Telefon-IP/Tkset“and click on the tab „LAN Settings“.
System Telephone ST 40 IP ST 40 IP Firmware Update Your ST 40 IP System Phone can be updated to the latest firmware version without hardware intervention. Your qualified dealer will be able to download new firmware from www.agfeo.com and upload this into your ST 40 IP.
System Telephone ST 40 IP Default Settings IoP Name: DHCP: IP-Address: Subnet Mask: Gateway: DNS1: DNS2: Server: Compression: „St40IP-xxxx“ („xxxx“ are the last 4 digits of the Mac Address of the ST 40 IP) Client 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 192.168.100.1 off Reset to Default - Press and hold the „Set“ button for at least 4 seconds. - Using the arrow buttons, select „Reset to Default“and press „OK“. The phone will now be reset to the default settings.
System Telephone ST 40 IP Copyright Copyright 2008 AGFEO GmbH & Co. KG Gaswerkstr. 8 D-33647 Bielefeld All rights reserved. Not excluding any rights or issues which will relate or effect patent matters. Reproduction of this manual, in part or in whole, or translation into other languages in any way or form, (whether hard copy, electronic- or any other format) is strictly prohibited, unless permission has been granted in writing by the above copyright holder.
The crossed out wheeled bin on the product means that this belongs to the group of Electro- and electronic apparatus.
