Technical data

104 Chapter 5
Spectrum Analyzer
Using the Analyzer as a Fixed Tune Receiver
Spectrum Analyzer
difference between adjacent peaks (this is the AM rate of the signal)
NOTE Make sure the delta markers above are placed on adjacent peaks. See
Figure 5-26. The frequency or the AM rate is 1 divided by the time
between adjacent peaks:
AM Rate = 1/1.0 ms = 1 kHz
Figure 5-26 Measuring Time Parameters
You can also use the marker inverse time readout to calculate AM rate
in Hz. Once the markers are properly positioned on adjacent peaks,
press
Marker, Marker Readout, Inverse Time.
N