Technical data

Chapter 1 15
Installation and Setup
Safety Information
Installation and Setup
Safety Symbols and Product Markings
The following safety symbols and product markings are located on the
analyzer or the external power supply. Familiarize yourself with the
symbols and their meaning before operating this analyzer.
The instruction documentation symbol. The product is
marked with this symbol when it is necessary for the user
to refer to the instructions in the documentation.
Indicates hazardous voltages.
Indicates earth (ground) terminal
This symbol is used to mark the on position of the power
line switch.
This symbol is used to mark the standby position of the
power line switch.
This symbol indicates that the input power required is AC.
The CE mark shows that the product complies with all
relevant European legal Directives (if accompanied by a
year, it signifies when the design was proven).
The CSA mark (not to be confused with the Agilent CSA
spectrum analyzer) is a registered trademark of the
Canadian Standards Association.
The C-Tick mark is a registered trademark of the
Australian Spectrum Management Agency.
This is a marking of an Industrial Scientific and Medical
Group 1 Class A product, and to indicate product
compliance with the Canadian Interference-Causing
Equipment Standard (ICES-001).
Separate collection symbol.
The Waste Electrical and Electronic Equipment (WEEE)
Directive (2002/96/EC), adopted by EU Commission on
13 Feb. 2003, is introducing producer responsibility on all
Electric and Electronic appliances from 13 Aug. 2005.
Under EU law, all electric and electronic equipment (EEE)
are required to be separated from normal waste for
disposal.
!