Technical data

Chapter 11 169
Working with Batteries
Installing Batteries
Working with Batteries
Installing Batteries
1. Open the battery door by turning the latch counterclockwise several
times until loose. Then pull the battery door open.
2. Insert two batteries. Both batteries must be installed for the
instrument to operate properly.
3. Close the battery door and turn the latch clockwise until tight to
secure the battery door.
NOTE When operating the analyzer on battery power, batteries of different
capacities will share current in proportion to individual battery
capacity. Therefore, when purchasing and installing batteries, ensure
that both batteries have equivalent capacities. Even batteries that
appear physically identical, can have different capacities. It is
recommended that batteries be purchased and installed in pairs.