Technical data

Chapter 2 45
Options and Accessories
Option Descriptions
Options and Accessories
Preamplifier, 3 GHz P03
An internal preamplifier assembly.
Frequency Range: 100kHz to 3GHz
Preamplifier, 6 GHz P06
An internal preamplifier assembly.
Frequency Range: 100kHz to 6GHz
Rack Mount Kit 1CM
Includes rack mount flanges and hardware. Used to rack
mount analyzers without front handles (available as P/N
5063-9215 and N1996-60021).
Rack Mount Kit with
Handles
1CP
Includes the parts necessary to rack mount an analyzer with
front handles attached (available as P/N 5063-9222 and
N1996-60021). (Includes handles.)
Service Documentation 0BW
The Service guide describes assembly-level troubleshooting
procedures, provides a parts list, and documents post-repair
procedures.
Soft Carrying Case SCC
An ergonomically designed case to hold the analyzer as well
as its cables and accessories.
Spectrogram 271
Provides a display with a history of the spectrum. You can
use it to:
• Locate intermittent signals.
• Track signal levels over time.
Stimulus/Response
Calibration Kit
SRK
The kit includes:
• Coax Accessories Case, plastic and foam (5000-0912)
• Open/Short, 50 ohm, N-type male (85032-60011)
• Termination, 50 ohm, N-type male (00909-60009)
Stimulus/Response
Measurement Suite
N8995A
Provides Stimulus & Response measurements:
Distance to Fault
Two Port Insertion Loss
One Port Insertion Loss
Return Loss
Requires Option TG3 or TG6 hardware.
Tracking Generator, 3 GHz TG3
Provides a 100 kHz to 3 GHz built-in tracking generator.
This source creates a source-receiver combination that
allows insertion-loss, frequency response, and return-loss
measurements. The source-receiver combination has a wide
distortion-free dynamic range, plus good sensitivity and
selectivity. (Must be installed for use with the N8995A
Stimulus/Response Measurement Suite.) For use with
Option 503 only.
Name
Option
Number
Description