Technical data

Chapter 2 49
Options and Accessories
Accessories
Options and Accessories
RF and Transient Limiters
The Agilent 11867A and 11693A RF Limiters protect the analyzer input
circuits from damage due to high power levels. The 11867A operates
over a frequency range of dc to 1800 MHz and begins reflecting signal
levels over 1 mW up to 10 W average power and 100 watts peak power.
The 11693A microwave limiter (0.1 to 12.4 GHz, usable to 18 GHz)
guards against input signals over 1 milliwatt up to 1 watt average
power and 10 watts peak power.
The Agilent 11947A Transient Limiter protects the analyzer input
circuits from damage due to signal transients. It specifically is needed
for use with a line impedance stabilization network (LISN). It operates
over a frequency range of 9 kHz to 200 MHz, with 10 dB of insertion
loss.
Power Splitters
The Agilent 11667A/B power splitters are two-resister type splitters
that provide excellent output SWR, at 50 Ω impedance. The tracking
between the two output arms, over a broad frequency range, allows
wideband measurements to be made with a minimum of uncertainty.
11667A: DC to 18 GHz
11667B: DC to 26.5 GHz
System II Bottom Feet kit,
System II Feet kit (p/n 5000-0913) is used to make the instrument
stackable. Bottom feet are added to the analyzer. (See I-Note:
5000-0914). The kit includes:
• System II Bottom Feet
• Tilt Stand
• Key Lock
Static Safe Accessories
9300-1367 Wrist-strap, color black, stainless steel. Four adjustable
links and a 7 mm post-type connection.
9300-0980 Wrist-strap cord 1.5 m (5 ft.)