User`s guide

Agilent 16440A User’s Guide, Edition 4 15
User's Guide
Installation
• Connecting the selector to the 4155/4156
Turn off the 4155/4156 and 41501 before connecting the instruments. Then
connect as shown below.
41501
4155/4156
16442A Test Fixture
16440A Selector
1
2
3
4
Instrument Terminal
16440A
Te r m in al
Cable
41501 To SMU/Pulse
Generator Selector
Interface
CONTROL Input 3.0 m or 1.5 m Control Cable
PGU
Input PGU
a
3.0 m or 1.5 m Coaxial Cable
MPSMU or HPSMU Input SMU 3.0 m or 1.5 m Triaxial Cable
4155 MPSMU
4156 HRSMU
16442A SMU
Output Selected
b
40 cm Triaxial Cable
Connector Plate SMU
a. You can use two inputs for one selector, and four inputs for two selectors.
b. You can use two outputs for one selector and four outputs for two selectors. Selector
output is either one of the PGU outputs or the SMU output.