User`s guide

Agilent 4155C/4156C User’s Guide Vol.2, Edition 6 4-17
Quasi-static C-V Measurements
Defining Measurement Conditions
To Execute or Stop Measurement
To execute a measurement, press:
Single Clears GRAPHICS or LIST screen, then executes measurement
one time. Measurement results are displayed on the
GRAPHICS or LIST screen.
Repeat Executes measurements continuously. Before each
measurement is executed, the GRAPHICS or LIST screen is
cleared. Most recent measurement results are displayed on the
GRAPHICS or LIST screen.
Append Executes measurement one time. Does not clear the
GRAPHICS or LIST screen. That is, measurement results are
added to the existing results.
To stop a measurement, press the
Stop key in the MEASUREMENT key group.