User`s guide

5-12 Agilent 4155C/4156C User’s Guide Vol.2, Edition 6
Stress Force
Defining Stress Conditions
The following illustrates the basic procedures for stress forcing.
1 Connecting your DUT to the
4155C/4156C. See Chapter 10 for
procedures.
2 Defining the stress units and constant
output units. See “To Set up Stress Source
Channels” on page 5-13.
To use the selector, see Chapter 8.
3 Setting the stress forcing parameters and
constant output value. The following tasks
are described:
• “To Set up Stress Condition/Timing”
• “To Set up ac (Pulse) Output”
• “To Set up dc Output”
4 Executing the stress forcing. See “To
Force Stress” on page 5-20.