Installation guide

First-Time Set Up 4
16900 Series Logic Analysis Systems Installation Guide 81
If expected Windows Welcome questions do not appear
During first- time power- up, depending on the configuration of your
network, some of the Windows Welcome questions that should appear, like
“Is this computer in a domain?”, may not appear.
If this occurs, you need to change the logic analysis system’s network
setup (after the first- time power up) using the normal Windows XP
methods (see “To change network settings” on page 104).
(If LAN connected) Will this
computer connect to the
Internet directly, or through a
network?
N/A Choose "Yes, through a
network"
(Agilent does not support
connecting to the internet
through a modem directly
connected to the logic
analyzer.)
N/A
(If LAN is not connected)
Windows unable to
determine LAN connectivity.
N/A You are told to set up LAN
later.
N/A
Ready to register with
Microsoft
Windows XP is already enabled to run on the logic analyzer. This registration is to allow
Microsoft to contact you.
Who will use this computer? For All: Entering names here lets multiple users use the logic analyzer with administrator
permissions. By default their passwords will be blank.
Table 5 Answering Windows Welcome Questions (continued)
Standalone (No LAN) Workgroup Domain