Specifications

Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System

Arming Second Analyzer

If you are using both analyzers on the same measurement module, you

can have one analyzer arm the other analyzer. The functionality of this

feature is handled in two different ways, depending on the analyzer

model.

167xx - Arming Second Analyzer

If you are using a 16715 and newer analyzer, the arming of one analyzer

by another is handled by the trigger function "Wait for second analyzer

to trigger".

165xx - Arming Second Analyzer

If you are using a 165xx analyzer, the arming of one analyzer by

another is handled by the "Machine Arming Tree" found under Arming

Control in the logic analyzer's Trigger tab - Settings tab.

The order in which the analyzers appear in the Arming Tree

determines the order they receive the arming signal. The arm signal

does not automatically start the next analyzer. The arm signal simply

tells the next analyzer that it can start evaluating its own trigger

specification and run when its trigger conditions are satisfied.

If a trigger specification in an analyzer has multiple sequence levels,