Specifications

125
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
The System Administration Tools
If the logic analysis system is configured to use DHCP network
protocol, it is required that its hostname and gateway name be
provided on the nameserver for each DHCP client address and gateway
address so that it can be retrieved at boot time with nslookup.
If it is required that the logic analysis system have a consistent
hostname, use static DHCP with permanent leases.
1. From the Networking tab in the System Administration Tools window,
select Network Setup ....
2. In the Network Setup dialog, select the DHCP networking option.
3. Select OK.
See Also “To resolve Windows names” on page 123
To disable networking
If the logic analysis system is not on a network, or should not be set up
on a network, networking can be disabled.
1. From the Networking tab in the System Administration Tools window,
select Network Setup ....
2. In the Network Setup dialog, select the Disable networking option.
3. Select OK.
Setting Up Emulation Probes/Modules on a
Network
Emulation probes, both standalone and interconnected to an emulation
module, need to be configured with LAN parameters.
The procedure for starting an connecting an emulation probe to the
network depends on which kind of emulator you are using:
• Setting Up an E5900A Emulation Probe (see the Emulation: Setting Up
help volume)
• Setting Up an E5900B Emulation Probe (see the Emulation: Setting Up