Specifications

178

Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System

Analyzer Probing Overview

Adapter-to-Board Connection

Both the 01650-63203 and the E5346A adapters include termination

for the logic analyzer. The 01650-63203 termination adapter plugs into

a 2 x 10 pin header with 0.1 inch spacing. The E5346A high-density

adapter connects to an AMP "Mictor 38" connector. If possible, use

support shrouds around the Mictor connector to relieve strain and

improve connections.

Direct Pod-to-Board Connection

If you provide proper termination as part of the target board, you can

connector. Suggested termination is shown in the Logic Analysis

System and Measurement Modules Installation Guide.

Also use this termination with the Agilent Technologies E5351A high-

density, non-terminated adapter.

Pod-to-Analysis Probe Connection

Analysis probes (formerly called preprocessors) are microprocessor-

specific interfaces that make it easier to probe buses. Generally,