Specifications

3
Agilent Technologies 16700A/B-Series Logic Analysis System
The Intermodule
Window (see page 65)
The Intermodule window graphically depicts the internal arming
sequence between measurement modules and any external trigger
connections to a target system. With multiple instrument
measurements, use the Intermodule window to adjust the order of
trigger arming, and to compensate for timing skew between the
modules.
• Example - Multiple Instrument Measurement (see page 83)
• Example - Multiple Analyzer Measurement (see page 92)
• Configure Arming Control Between Instrument Tools (see page 108)
• Configure Arming Control Between Analyzers (see page 110)
• Configure External Triggering with the Port In/Out Signal (see page 97)
• Adjusting Intermodule Skew (see page 101)
• Understanding the Run/Group Run Function (see page 113)
The Workspace
Window (see page 59)
The Workspace window shows a graphical layout of your measurement
configuration. Use the Workspace window to alter your measurement
by adding or deleting tools, or by changing the data flow connections
between tools.
• Adding Tools to a Measurement Configuration (see page 61)
• Deleting Tools from a Measurement Configuration (see page 61)
• Changing the Connections between Tools (see page 62)