Specifications

45
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
File Management Tools
Other Operations • “To format floppy disks” on page 53
• “To refresh the File Manager” on page 54
• “To mount an external hard drive” on page 54
See Also “File Types” on page 56
“Default Directory Descriptions” on page 57
To load configuration files
You can load settings and data for all tools configured when the
configuration file was saved, or you can load just the setting and data
for a particular instrument. Data saved in a configuration file is always
loaded.
Load a configuration file by selecting File->Load Configuration in a
tool window, or by selecting the Load tab in the File Manager.
1. From the File Manager window, select a file to load in the Contents frame
of the dialog.
You may need to navigate the local or mounted file system using the
Current Disk field and the Directories frame to find the desired file.
(Optionally, type the desired filepath and name in the "Filename" box.)
Note that a mounted directory will have a different icon.
2. Choose a target that defines where the configuration file contents will be
loaded.
• All will load all tools configured at the time of saving.
• Selecting a specific instrument will narrow the loading to just that
instrument.
3. Choose the appropriate options:
• Config and Tools - loads the selected instrument and all tools
connected to its output.
• Config Only - loads only the selected instrument.
• Quick Waveform Load - loads the configuration as specified except