Specifications

54
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
File Management Tools
Close.
To refresh the File Manager
If you add, delete, or rename a file while the File Manager window is
open, the directory you are in will not show the latest changes until you
refresh the directory by selecting Disk, then Refresh Current
Directory.
To mount an external hard drive
The following installation guidelines show the important sequence of
steps when connecting or disconnecting an external hard drive. For the
complete procedure, refer to the Logic Analysis Systems Installation
Guide.
To connect the external hard drive
CAUTION: It is very important to follow the sequence of steps exactly when connecting
or disconnecting the external hard drive. The external hard drive should be
the first device that receives power, and the last device to be shut down. If you
do not follow the correct sequence of steps, data on the external hard drive
may become corrupt, or the drive may become unreadable.
1. Power down the logic analysis system frame.
2. Connect the external hard drive.
3. Power up the external hard drive.
4. Power up the logic analysis system frame.
5. From the interface, mount the external hard drive. See the procedure To
mount the external hard drive below.
To disconnect the external hard drive
The following guidelines must be followed before removing the
external hard drive from its case, or disconnecting the drive from the