Specifications

55
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
File Management Tools
logic analysis system.
1. From the interface, unmount the external hard drive. See the procedure
To unmount the external hard drive below.
2. Power down the logic analysis system frame.
3. Power down the external hard drive.
4. Disconnect the external hard drive.
To mount the external hard drive
CAUTION: If this is the first time mounting the external hard drive, or if the drive is
corrupt, you will get a message asking if you want to format the disk. If you
choose to format the drive, all data on that drive will be lost.
1. From the Icon bar in the main system window, select the System Admin
icon, then from the System Administration Tools window that appears,
select the Admin tab.
2. From the System Administration Tools window select Mount External
Disk....
3. In the Mount External Disk dialog, set a SCSI Address number. Select the
same number that is displayed in the green LCD on the front panel of the
external hard drive.
4. In the Local Path: field, type in the local directory name where the drive
will be mounted. This should be either an existing empty directory, or, one
that does not yet exist. If it does not exist, it will be created automatically
for you.
5. Select Mount to mount the drive. The drive is now accessible through this
directory.
To unmount the external hard drive
1. From the Icon bar in the main system window, select the System Admin
icon, then from the System Administration Tools window that appears,
select the Admin tab.
2. From the System Administration Tools window select Mount External
Disk....
3. In the Mount External Disk dialog, select the drive from the Current