Specifications

81
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
Overview - Multiple Frames Configuration
NOTE: Do not connect the frames in a loop configuration. A proper configuration will
have the INPUT of the first frame unused, the OUTPUT of the last frame
unused, and you should have one connector cable left unused.
16700B and 16702B frames can be mixed and connected in any order
in a Multi-frame group.
Connecting Expansion Frames
Each mainframe in a Multi-frame group can have one expansion frame
connected to it. Connect one end of the 100 pin flat cable to the
connector on the mainframe labeled "To 16701B Expansion Frame".
Connect the other end of the cable to the connector on the expansion
frame labeled "To 16700/02".
NOTE: DO NOT install the Multi-frame module in slots 3 or 4 of the expansion frame.
When connecting expansion frames to mainframes, USE THE 100 pin flat
cable in the expansion frame connector.