Specifications

88
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
Using a Timing Analyzer and an Oscilloscope
More about Independent and Group Run Configurations
Group Run allows all connected tools which are configured as Group
Run, to run when any Group Run field is selected. If any connected
tools are changed to Independent Run, they will not run with the
group.
Independent Run allows specific tools to remain in a connected group,
but run independently without affecting the run status of the other
instrument tools. To independently run an Instrument tool, you must
select Run from within one of that tool's windows.
If any of the connected instrument tools are changed to Group Run, the
Run field for that particular tool, plus all tools connected to its output,
will change to Group Run.
Run/Group Run Function (see page 113)
Importing Signals into the Display
1. Select the desired Instrument tool.
2. Select Connect.
3. Select Group Run. Running the measurement at this point makes the new
imported signals available for insertion.
4. From the menu bar in the waveform display dialog, select Edit, then select
Insert.
5. From the Label Dialog that appears, select the desired signal to import,
then select Apply.
6. Select Close.