Technical data

3CALCulate Subsystem

186 N1911A/1912A P-Series Power Meters Programming Guide

CALCulate[1]|2|3|4:LIMit:STATe <boolean>

This command enables/disables the test limits for the specified window.

Syntax

Example

Reset Condition

On reset, limit checking is disabled.

Query

CALCulate[1]|2|3|4:LIMit:STATe?

The query enters 1 or 0 into the output buffer indicating the status of the

limits testing feature for the specified window/measurement.

• 1 is returned when limits testing is enabled

• 0 is returned when limits testing is disabled

CALC2:LIM:STAT 1 This command enables the limit checking

function for the lower window upper

measurement.

0|OFF

1|ON

Space

:LIM

:STAT

CALC