Technical data

DISPlay Subsystem 5

N1911A/1912A P-Series Power Meters Programming Guide 245

DISPlay[:WINDow[1]|2]:STATe <boolean>

This command enables/disables the upper or lower window (WINDow1 and

WINDow2 respectively) so that the display shows a single window only. The

displayed window is presented in expanded format, showing a single

measurement only: either the single measurement that was shown on the

window, or the currently selected measurement, if two measurements had

been shown.

Syntax

Examples

Reset Condition

On reset, both windows are enabled.

DISP:WIND2:STAT OFF This command disables the lower window.

The upper window in shown in expanded

format, displaying its currently selected

measurement.

DISP:WIND2:STAT ON This command enables the lower window

so that a dual window display is once

more provided.

:STAT

0|OFF

1|ON

Space

:WIND

DISP