Technical data

OUTPut Subsystem 8

N1911A/1912A P-Series Power Meters Programming Guide 295

OUTPut:RECorder[1]|2:LIMit:LOWer <numeric_value>

This command sets the minimum scaling value for the specified recorder

output. The units used are dependent on the units currently set for the

CALC block specified in OUTPut:RECorder[1]|2:FEED <data_handle>.

Syntax

Parameters

Example

Reset Condition

On reset, the minimum scaling value is set to –150 dBm.

Item Description/Default Range of Values

numeric_value A numeric value for the minimum scaling

value. The units used—dBm, W or %—are

dependent on the units currently set for the

CALC block specified in

OUTPut:RECorder[1]|2:FEED

<data_handle>.

–150 to +230 dBm

1 aW to 100 XW

0 % to 999 %

OUTP:REC:LIM:LOW –90 This command sets the minimum scaling

value to –90.

OUTP

:LIM

:REC

Space

:LOW

numeric_value