Technical data

OUTPut Subsystem 8

N1911A/1912A P-Series Power Meters Programming Guide 297

OUTPut:RECorder[1]|2:LIMit:UPPer <numeric_value>

This command sets the maximum scaling value for the specified recorder

output. The units used are dependent on the units currently set for the

CALC block specified in OUTPut:RECorder[1]|2:FEED <data_handle>.

Syntax

Parameters

Example

Reset Condition

On reset, the maximum scaling value is set to +20 dBm.

Item Description/Default Range of Values

numeric_value A numeric value for the minimum scaling

value. The units used—dBm, W or %—are

dependent on the units currently set for the

CALC block specified in

OUTPut:RECorder[1]|2:FEED

<data_handle>.

–150 to +230 dBm

1 aW to 100 XW

0 % to 999 %

OUTP:REC:LIM:UPP 10 This command sets the maximum scaling

value to 10.

OUTP

:LIM

:REC

Space

:UPP

numeric_value