Technical data

PSTatistic Subsystem 9
N1911A/1912A P-Series Power Meters Programming Guide 309
PSTatistic:CCDF:GAUSsian[:STATe] <boolean>
This command is used to turn on or off the Gaussian trace and it is
independent of the channels attached.
Syntax
Example
Reset Conditions
On reset, the Gaussian trace will be cleared (OFF).
NOTE
This command is only applicable when P-Series sensors are present and the following
conditions are met:
• Free-run acquisition mode is selected
• NORMal or DOUBle measurement speed setting is chosen
• Expanded window is enabled (not full CCDF screen window)
0|OFF
1|ON
Space
?
:STAT
:GAUS
:CCDF
PST
PST:CCDF:GAUS ON This command turns on the Gaussian
trace.
PST:CCDF:GAUS OFF This command turns off the Gaussian
trace.