Technical data

PSTatistic Subsystem 9

N1911A/1912A P-Series Power Meters Programming Guide 333

Reset Condition

On reset, the CCDF cummulative counts will be set to the default value,

100 M samples.

Query

PSTatistic[1]|2:CCDF:COUNt?

The query returns the current numeric value of the CCDF cummulative

count for the respective channel selected.

Query Example

Error Messages

• If no sensor or wrong sensor is connected to the channel, error –241

"Hardware missing" occurs.

• If channel is not in free- run acquisition mode, error –221 "Settings

conflict" occurs.

• If user inputs a count that is lesser than 100 M or greater than 10 G,

error –222 "Data out of range" occurs. Any input count that is within

range will be normalized and round down to the nearest 100 M.

PST1:CCDF:COUN? This command queries the numeric value

of CCDF cummulative counts for Channel