Technical data

1 Power Meter Remote Operation
36 N1911A/1912A P-Series Power Meters Programming Guide
Figure 1-3 Averaging Range Hysteresis
Filter Length
You specify the filter length using the following command:
[SENSe[1]]|SENSe2:AVERage:COUNt <numeric_value>
The range of values for the filter length is 1 to 1024. Specifying this
command disables automatic filter length selection. Increasing the value of
the filter length reduces measurement noise. However, the time to take the
measurement is increased.
Minimum Sensor Power Minimum Sensor Power + 10 dB
Range Hysteresis
10.5 dB9.5 dB