User`s guide

1 Introduction

16 N1911A/1912A P-Series Power Meters User’s Guide

Figure 1-6 Trace display in single enlarged window in trigger delay mode

Figure 1- 6 shows a single enlarged window with the Gate Ctrl menu and

associated tables and trigger delay.

30 Pressing removes the gate markers and displays the trigger

marker(s). The indicates when the trigger event occurs, whilst

shows the delayed trigger point. When the two points coincide only the

trigger is shown.

In the example shown in Figure 1- 6, the appears ahead of the as

a trigger delay of –5.00 µs has been configured, placing the

measurement trigger before the trigger event. You can configure the

trigger delay by pressing and entering a numeric value.

To indicate an off- screen trigger event, is displayed. To indicate an

off- screen trigger point, is displayed.

31 The selected channel and gate number is displayed.

32 The trigger setting and slope is displayed. Examples shown in

Figure 1- 6 are Internal Channel A and a Positive Slope.

Select TgDel