Technical data

102 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:SBUS<n>:UART:TRIGger
:DATA <value> (see
page 526)
:SBUS<n>:UART:TRIGger
:DATA? (see page 526)
<value> ::= 8-bit integer from
0-255 (0x00-0xff) in decimal,
<hexadecimal>, <binary>, or
<quoted_string> format
<hexadecimal> ::= #Hnn where n
::= {0,..,9 | A,..,F} for
hexadecimal
<binary> ::= #Bnn...n where n ::=
{0 | 1} for binary
<quoted_string> ::= any of the
128 valid 7-bit ASCII characters
(or standard abbreviations)
:SBUS<n>:UART:TRIGger
:IDLE <time_value>
(see page 527)
:SBUS<n>:UART:TRIGger
:IDLE? (see page 527)
<time_value> ::= time from 1 us
to 10 s in NR3 format
:SBUS<n>:UART:TRIGger
:QUALifier <value>
(see page 528)
:SBUS<n>:UART:TRIGger
:QUALifier? (see
page 528)
<value> ::= {EQUal | NOTequal |
GREaterthan | LESSthan}
:SBUS<n>:UART:TRIGger
:TYPE <value> (see
page 529)
:SBUS<n>:UART:TRIGger
:TYPE? (see page 529)
<value> ::= {RSTArt | RSTOp |
RDATa | RD1 | RD0 | RDX |
PARityerror | TSTArt | TSTOp |
TDATa | TD1 | TD0 | TDX}
:SBUS<n>:UART:WIDTh
<width> (see
page 530)
:SBUS<n>:UART:WIDTh?
(see page 530)
<width> ::= {5 | 6 | 7 | 8 | 9}
Table 27 :SBUS<n>:UART Commands Summary (continued)
Command Query Options and Query Returns
Table 28 General :SEARch Commands Summary
Command Query Options and Query Returns
n/a :SEARch:COUNt? (see
page 533)
<count> ::= an integer count
value
:SEARch:MODE <value>
(see page 534)
:SEARch:MODE? (see
page 534)
<value> ::= {SERial1}
:SEARch:STATe <value>
(see page 535)
:SEARch:STATe? (see
page 535)
<value> ::= {{0 | OFF} | {1 |
ON}}